How to install Detour's Backbone. - Jeep Cherokee Forum xjTalk
Jeep Cherokee Forum xjTalk
jeeptalkshow.com
  

Go Back   Jeep Cherokee Forum xjTalk > xjtalk Articles > Articles

Notices

Reply
 
Article Tools Search this Article Display Modes
  #1  
Old
muddeprived's Avatar
muddeprived muddeprived is offline
Level: Uber Jeep Cherokee Trailer Queen
muddeprived's Information
Join Date: Mar 2009
Location: beaver Falls, PA
Thanks: 2
Thanked 237 Times in 184 Posts
Groans: 0
Groaned at 1 Time in 1 Post
Chats: 0
muddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to behold
Default How to install Detour's Backbone.
by muddeprived 05-02-2009, 09:07 AM



This is a write-up for Detour's Backbone front winch bumper. Enjoy

First, of all things, you need to order "da bumper". It's real easy. First make sure you have at least 350 ready. Next you

wanna go to XJ / MJ Backbone Bumper System and check out some of the pictures. Have a nice big bowl in

front of you to catch the drool. After drying off your mouth, call him up or send him an email saying "i want that damn

bumper!" and he'll bill you, you pay him, he ships it out, etc etc, you own a jeep, you know the drill VERY WELL.

A week or two later, a big brown box will appear on your doorstep. Rip that open and you will find this inside:




inside that envelope is where the nuts and bolts are hiding...



There were two white papers included and best thing of the entire package:

A STICKER!




Now you have everything you need to put this bumper on your.......you do have a cherokee right? I sure hope so. Here's

what we will be installing it on:



Before we can install it, we hafta paint it. Detours is smart. They send the winch bumper primed but not painted. Most

companies use powerdercoating and it ALWAYS get's damaged through shipping. You can't really touch up

powercoating that well. This bumper comes primed and ready for you to rattle can it or pro-paint it. In my case, i opted

for the most un-common color used on bumpers: black.



Let's see how much the two cans costs cuz i can't remember...



Oh damnit.....(rubbing eyes)



Ahh there it is. Almost 6. See, not too bad. Cheap paint!

Now it's time to paint the bumper so it's ready to be bolted on.



Paint it first so it would have time to dry while you are tearing apart your front end monster-garage style.

Ok let's climb under the front and check out what we need to remove or snap in half (argh!!!!)..
Reply With Quote
Views 26912 Comments 46
Total Comments 46

Comments

  #2  
Old 05-02-2009
muddeprived's Avatar
muddeprived muddeprived is offline
Level: Uber Jeep Cherokee Trailer Queen
muddeprived's Information
 
Join Date: Mar 2009
Location: beaver Falls, PA
Posts: 1,294
Thanks: 2
Thanked 237 Times in 184 Posts
Groans: 0
Groaned at 1 Time in 1 Post
Chats: 0
muddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to behold
Default



There are two brackets holding the bumper to the fake frame with three bolts per side. In order to remove those bolts,

you will need one of these:



With a 15mm socket....



Stick that cool little tool on the bolts and turn counterclockwise..



Remove all six bolts. I was curled up in a little ball expecting the bumper to fall on my nuts but that never occured. I

realized that there was something still holding the bumper on. Hmm.....AH HA! Found two pesky little bastard screws

holding the end caps on. they are on in the inside and you can see them by laying down and looking up through the hole

(remove plastic flare flap up and out of the way)...



They are way up on the inside of the end caps so you need some reach. Take out the extenze pills and blend them with

water. Pour it on your neat little tool that you used to remove the six bumper bolts. This will be the result:



See, longer is better. Now go through your entire socket set, one by one, and try to find the right size socket. Of course

it's always the last one you pick up and in this case it is size.......



umm...can't see.....



..damn camera.......ahh screw it, simple:



It's 8mm. No i didn't get 8mm and 9mm mixed up. I lost 9mm when i first bought this 50 set of sockets. Nice job right?
Reply With Quote
  #3  
Old 05-02-2009
muddeprived's Avatar
muddeprived muddeprived is offline
Level: Uber Jeep Cherokee Trailer Queen
muddeprived's Information
 
Join Date: Mar 2009
Location: beaver Falls, PA
Posts: 1,294
Thanks: 2
Thanked 237 Times in 184 Posts
Groans: 0
Groaned at 1 Time in 1 Post
Chats: 0
muddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to behold
Default

Back on topic. Remove those two screws on both sides and then the bumper will start to release itself. I was lucky once

again cuz some sort of hose halted the bumper's progress towards earth:



Someone installed a bomb that apparently did not function correctly and has been collecting dust. There's a hose

coming out of it and i assume it's a vacuum powered bomb. Since my AC and heater don't work this thing has no

chance to explode but I'll keep it in there anyways. Pull that hose out of the bomb....CAREFULLY.....

and ....HOUSTON, WE HAVE TOUCHDOWN!



Mission accomplished!



Ok now you have the bumper in YOUR command, let's remove the end caps. They are in the way of measuring if you

decide to keep your factory bumper.

There are two bolts per side, on the bottom:



You will need your trusty tool you've been using and a socket in the size of....




oh..here we go again...




10mm. Yeah, the same size holding the rear end caps on, that i snapped in half.

take that wonderful tool with the socket and remove that bolt...




(3 minutes later)



(7 minutes later)



Hmm it just keeps spinning without coming out. Let's look underneath..



Ahhh no wonder. No biggie though, nothing my grips can't handle..



Here's the other bolt near the end..



Once you get those off, the end cap will pull away from the bumper..

Reply With Quote
  #4  
Old 05-02-2009
muddeprived's Avatar
muddeprived muddeprived is offline
Level: Uber Jeep Cherokee Trailer Queen
muddeprived's Information
 
Join Date: Mar 2009
Location: beaver Falls, PA
Posts: 1,294
Thanks: 2
Thanked 237 Times in 184 Posts
Groans: 0
Groaned at 1 Time in 1 Post
Chats: 0
muddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to behold
Default

Of course, like the bumper itself, it doesn't come off without a fight. There's another freakin bolt holding it on. What

the....screw it, just tear it...



Ok that's off and so is the other side. Let's go check out the bumper and see how it's drying..



Nice

Back to the bumper. Mine came with this bling bling low rider flap or whatever it's called. Garbage really. Not need either.

Let's take that off.



..and throw it away...literally.




Now comes the time where you have to remove the three steering box bolts. I was expecting to breeze through this with

ease but of course nothing ever goes as planned. I ended up snapping two of the three steering box bolts. They were

rust-welded to the box/spacer. Since I could not get them out of the box, I had to replace the box with a reman:



and then order a frame spacer from c-rok:



I went with c-rock because it's steel. The oem spacer is made out of alum. or magnesium and it corrodes to metal,

which left me screwed in the first place. The c-rok spacer acts as a brace and replaces the oem spacer. With the c-rok

spacer and detour's bumper, both sides of my frame are reinforced and i have little to worry about tearing the box off our

cardboard frames.

It has been a week and now i'm continuing the install. I installed the steering box and it's ready to go. Let's resume by

removing the nut clips on the end of the frame, that held the bumper on. You remember the six bolts you removed?

These are the nuts for them. Pop them off anyway you please..



Now it's time to slide the detour's bumper onto the frame but I decided to check the bolt holes first. Good thing I did cuz

look what I found:



Whoever rebuilt the front end didn't do it perfectly. The bolt holes were blocked 1/2 way by the nutsert for the sway bar

brackets.

Both sides too.....



I did not panic. I have another trusty tool upstairs that can easily take care of this minor setback:



Yeah baby! POWER TOOLS!.....well sorta....
Reply With Quote
  #5  
Old 05-02-2009
muddeprived's Avatar
muddeprived muddeprived is offline
Level: Uber Jeep Cherokee Trailer Queen
muddeprived's Information
 
Join Date: Mar 2009
Location: beaver Falls, PA
Posts: 1,294
Thanks: 2
Thanked 237 Times in 184 Posts
Groans: 0
Groaned at 1 Time in 1 Post
Chats: 0
muddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to behold
Default

After a bit of dremeling, the holes were clear for insertion:





Now let's take the bumper and slide it on the frame, inserting one bolt per side to hold it in place.



After it's reunited with the jeep, insert two more bolts on the passenger side, and the three steering box bolts on the

driver's side.





Let's start off by tightening the bolts closest to you, near the front:

I chose to use some anti-sieze on the threads. It'll save my arse later on.



Now we need to pour some more extenze drink on the trusty tool to get it long again and stick a socket on it.



This is what size you need and i'm not bothering taking another picture of the socket...



Tighten clockwise..



After getting those two bolts on both sides, move onto the passenger side two rear bolts. You will need the same tool

again, and i found out it's called a socket wrench, or rachet. I still call it my trusty tool.



and of course, the size socket you need...

Reply With Quote
  #6  
Old 05-02-2009
muddeprived's Avatar
muddeprived muddeprived is offline
Level: Uber Jeep Cherokee Trailer Queen
muddeprived's Information
 
Join Date: Mar 2009
Location: beaver Falls, PA
Posts: 1,294
Thanks: 2
Thanked 237 Times in 184 Posts
Groans: 0
Groaned at 1 Time in 1 Post
Chats: 0
muddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to behold
Default

This bolt has those tricky nuts on the other side that fooled us earlier. We will need the same size open end wrench to

overcome troublemaker..



Tighten them up and now it's the steering box bolts. You will need this size:



I had to install my c-roke brace and steering box, and you will be doing pretty much the same thing with your box and

spacer..



Again, tighten the steering box bolts clockwise and TIGHT. I dunno the factory torque specs on these bolts, nor do I

care. I just put them super freakin tight with some blue locktight. They aren't going anywhere.

Now we are pretty much done but before we sit back and check out the new winch bumper, let's see what the scorecard

is showing:



Yup, the bumper won 6-0. That's how many times i struck my head on the newly extended winch bumper that just

happens to extend right over your head (if your jeep is high enough). It hurt.....bad.

After retreiving an ice pack from the freezer, we can now stand back and check out our new accessory added to our

jeep:

A paper towel holder:



the only one on the market today.


This project is not completed yet. You are only half done. Now you have to decide whether you wanna re-use your factory bumper or modify an aftermarket bumper to fit on it. I chose to go with my factory bumper cuz i'm cheap.

I was gonna give you a write-up on how to cut it but my gf was a little ticked seeing her camera covered in grease and dirt from my hands during the installation of the paper towel holder. "It happens" i told her but that ended up with no camera to use. I did manage to sneak a few completed shots. Don't tell her please...shh!





You can see the big gap below the bumper from when we threw away that center piece. I am in the process of cutting the end caps to shorter so they line up with that center section. It'll give me more ground clearance too.



How far it sticks out and what my head battled against...




Well, that's that. I hope this helps enough to prevent you guys from installing the bumper upside down or something.
Reply With Quote
  #7  
Old 05-02-2009
Mudderoy's Avatar
Mudderoy Mudderoy is offline
"Just some guy"
Tony's Information
 
Join Date: Mar 2009
Location: Katy, Texas
Posts: 27,042
Thanks: 10,564
Thanked 6,929 Times in 4,148 Posts
Groans: 10
Groaned at 13 Times in 12 Posts
Chats: 30715
Mudderoy has a reputation beyond reputeMudderoy has a reputation beyond reputeMudderoy has a reputation beyond reputeMudderoy has a reputation beyond reputeMudderoy has a reputation beyond reputeMudderoy has a reputation beyond reputeMudderoy has a reputation beyond reputeMudderoy has a reputation beyond reputeMudderoy has a reputation beyond reputeMudderoy has a reputation beyond reputeMudderoy has a reputation beyond repute
Garage
View Mudderoy's Twitter Profile
Default

Hilarious! Taking all those pictures makes the work last twice as long, so many thanks for doing it.
Reply With Quote
  #8  
Old 05-02-2009
muddeprived's Avatar
muddeprived muddeprived is offline
Level: Uber Jeep Cherokee Trailer Queen
muddeprived's Information
 
Join Date: Mar 2009
Location: beaver Falls, PA
Posts: 1,294
Thanks: 2
Thanked 237 Times in 184 Posts
Groans: 0
Groaned at 1 Time in 1 Post
Chats: 0
muddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to behold
Default

Quote:
Originally Posted by Mudderoy View Post
Hilarious! Taking all those pictures makes the work last twice as long, so many thanks for doing it.
Tell me about it. Thanks
Reply With Quote
  #9  
Old 05-02-2009
firehawk's Avatar
firehawk firehawk is offline
Level: Cherokee XJ
Kim's Information
 
Join Date: Mar 2009
Location: Indianapolis, Indiana
Posts: 689
Thanks: 27
Thanked 91 Times in 67 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
Chats: 0
firehawk is a jewel in the roughfirehawk is a jewel in the roughfirehawk is a jewel in the roughfirehawk is a jewel in the rough
Default

Deprived does the BEST write ups! Comical, but complete. That is what I missed on CT while you were 'gone". Looks nice.

BTW, the WTF you ran into.....my 2000 was the same. Apparently Jeep put some sort of "plate" to reinforce the swaybar mounts inside the frame. I guess they didn't care if it covered up half the hole.

BTW2...where's the winch?
__________________
2000 Cherokee Sport 4.0L/AW4/NP242....

" the ONLY reason you're still conscious is I DON'T want to have to carry you!"
......Jack Bauer
Reply With Quote
  #10  
Old 05-02-2009
BlueXJ's Avatar
BlueXJ BlueXJ is offline
Moderator Emeritus
Mike's Information
 
Join Date: Mar 2009
Location: South TEXAS
Posts: 7,244
Thanks: 603
Thanked 1,346 Times in 999 Posts
Groans: 14
Groaned at 8 Times in 7 Posts
Chats: 3
BlueXJ has a reputation beyond reputeBlueXJ has a reputation beyond reputeBlueXJ has a reputation beyond reputeBlueXJ has a reputation beyond reputeBlueXJ has a reputation beyond reputeBlueXJ has a reputation beyond reputeBlueXJ has a reputation beyond reputeBlueXJ has a reputation beyond reputeBlueXJ has a reputation beyond reputeBlueXJ has a reputation beyond reputeBlueXJ has a reputation beyond repute
Default

One of the best writeups of all time. Informative and hilarious at the same time. Going out for some extenze right now. Can you do a writeup on that mixing procedure too!!
Reply With Quote
  #11  
Old 05-02-2009
muddeprived's Avatar
muddeprived muddeprived is offline
Level: Uber Jeep Cherokee Trailer Queen
muddeprived's Information
 
Join Date: Mar 2009
Location: beaver Falls, PA
Posts: 1,294
Thanks: 2
Thanked 237 Times in 184 Posts
Groans: 0
Groaned at 1 Time in 1 Post
Chats: 0
muddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to behold
Default

Quote:
Originally Posted by firehawk View Post
Deprived does the BEST write ups! Comical, but complete. That is what I missed on CT while you were 'gone". Looks nice.

BTW, the WTF you ran into.....my 2000 was the same. Apparently Jeep put some sort of "plate" to reinforce the swaybar mounts inside the frame. I guess they didn't care if it covered up half the hole.

BTW2...where's the winch?
Oh I guess it came from the factory that way. weird.

Winch? What for? It holds paper towels.


There's SUPPOSED to be a winch on there but the damn gear box failed on me so i had to spend elsewhere. I'll get one on there soon.
Reply With Quote
  #12  
Old 05-02-2009
muddeprived's Avatar
muddeprived muddeprived is offline
Level: Uber Jeep Cherokee Trailer Queen
muddeprived's Information
 
Join Date: Mar 2009
Location: beaver Falls, PA
Posts: 1,294
Thanks: 2
Thanked 237 Times in 184 Posts
Groans: 0
Groaned at 1 Time in 1 Post
Chats: 0
muddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to beholdmuddeprived is a splendid one to behold
Default

Quote:
Originally Posted by BlueXJ View Post
One of the best writeups of all time. Informative and hilarious at the same time. Going out for some extenze right now. Can you do a writeup on that mixing procedure too!!
Just drop 3 pills in 1 oz of water and blend. Drink half of it and leave the other half for the tool. Careful with the 'reaction'.
Reply With Quote
  #13  
Old 05-02-2009
Mudderoy's Avatar
Mudderoy Mudderoy is offline
"Just some guy"
Tony's Information
 
Join Date: Mar 2009
Location: Katy, Texas
Posts: 27,042
Thanks: 10,564
Thanked 6,929 Times in 4,148 Posts
Groans: 10
Groaned at 13 Times in 12 Posts
Chats: 30715
Mudderoy has a reputation beyond reputeMudderoy has a reputation beyond reputeMudderoy has a reputation beyond reputeMudderoy has a reputation beyond reputeMudderoy has a reputation beyond reputeMudderoy has a reputation beyond reputeMudderoy has a reputation beyond reputeMudderoy has a reputation beyond reputeMudderoy has a reputation beyond reputeMudderoy has a reputation beyond reputeMudderoy has a reputation beyond repute
Garage
View Mudderoy's Twitter Profile
Default

Quote:
Originally Posted by firehawk View Post
Deprived does the BEST write ups! Comical, but complete. That is what I missed on CT while you were 'gone". Looks nice.

BTW, the WTF you ran into.....my 2000 was the same. Apparently Jeep put some sort of "plate" to reinforce the swaybar mounts inside the frame. I guess they didn't care if it covered up half the hole.

BTW2...where's the winch?
Same here. I had to drill it out asswell.
Reply With Quote
  #14  
Old 05-02-2009
firehawk's Avatar
firehawk firehawk is offline
Level: Cherokee XJ
Kim's Information
 
Join Date: Mar 2009
Location: Indianapolis, Indiana
Posts: 689
Thanks: 27
Thanked 91 Times in 67 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
Chats: 0
firehawk is a jewel in the roughfirehawk is a jewel in the roughfirehawk is a jewel in the roughfirehawk is a jewel in the rough
Default

Quote:
Originally Posted by muddeprived View Post
Just drop 3 pills in 1 oz of water and blend. Drink half of it and leave the other half for the tool. Careful with the 'reaction'.
The half you drink... is that to help raise up the parts you're putting on the Jeep? You do know if "it" lasts more than four hours to seek medical attention don't you? SWING!!!
__________________
2000 Cherokee Sport 4.0L/AW4/NP242....

" the ONLY reason you're still conscious is I DON'T want to have to carry you!"
......Jack Bauer
Reply With Quote
  #15  
Old 05-02-2009
Mudderoy's Avatar
Mudderoy Mudderoy is offline
"Just some guy"
Tony's Information
 
Join Date: Mar 2009
Location: Katy, Texas
Posts: 27,042
Thanks: 10,564
Thanked 6,929 Times in 4,148 Posts
Groans: 10
Groaned at 13 Times in 12 Posts
Chats: 30715
Mudderoy has a reputation beyond reputeMudderoy has a reputation beyond reputeMudderoy has a reputation beyond reputeMudderoy has a reputation beyond reputeMudderoy has a reputation beyond reputeMudderoy has a reputation beyond reputeMudderoy has a reputation beyond reputeMudderoy has a reputation beyond reputeMudderoy has a reputation beyond reputeMudderoy has a reputation beyond reputeMudderoy has a reputation beyond repute
Garage
View Mudderoy's Twitter Profile
Default

Quote:
Originally Posted by BlueXJ View Post
One of the best writeups of all time. Informative and hilarious at the same time. Going out for some extenze right now. Can you do a writeup on that mixing procedure too!!
Only if there is a super model involved.


ahhh female super model.
Reply With Quote
Reply

Bookmarks

Tags
backbone, detour, install
Home Forums Articles Register FAQ Members List Calendar Search Today's Posts Mark Forums Read


Article Tools Search this Article
Search this Article:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Articles
Article Author Forum Replies Last Post
How to install Detour's Backbone. muddeprived Technical "HOW TO" Articles 45 11-05-2009 09:33 AM
Detours Backbone System install firehawk Technical "HOW TO" Articles 69 06-05-2009 03:27 PM
I love my new Detour's product. muddeprived Modified 18 05-03-2009 10:18 PM
Detours Backbone System install firehawk Technical "HOW TO" Articles 6 03-24-2009 07:34 PM


Advertise with us through Google's Adsense Direct!

VigLink badge

Large Visitor Map

All times are GMT -5. The time now is 09:23 PM.

Powered by vBulletin® Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Garage vBulletin Plugins by Drive Thru Online, Inc.

Style Provided By: Wrestling Clique - Wrestling Forums
Jeep, Cherokee, are copyrighted and trademarked to the Jeep/Chrysler Corporation
xjtalk is not in any way associated with Jeep or the Chrysler Corp.

no new posts