Results 1 to 3 of 3

Thread: 4x4 swap problems

  1. #1
    Join Date
    May 2013
    Location
    San Antonio
    Posts
    15

    Default 4x4 swap problems

    So I swapped in a trans,transfercase, d30 and now the front drive shaft will hit the bottom of the exhaust manifold it's a 2001. Is there a difference in a 2wd and a 4wd exhaust?

  2. #2
    Join Date
    Sep 2009
    Location
    Chico, CA
    Posts
    29,847

    Default Re: 4x4 swap problems

    Not sure on that, but is it the manifold or down pipe it hits. The 4WD pipe has a sharp bend in it to miss the driveline
    230 hp 4.3L Chevy
    Built 4L60E with manual lockout
    Atlas 4 speed
    Griffin radiator
    On board air
    Warn 9.5ti on custom bumper
    7.5" RE front and bastard pack rear on custom long arms
    30 gal gas tank
    lockers
    And a bunch of other stuff

  3. #3
    Join Date
    May 2013
    Location
    San Antonio
    Posts
    15

    Default Re: 4x4 swap problems

    I got the jeep cheap because the kid who owned it ran it up on a huge rock and it split the oil pan , I thought that was all the damage it caused but the exhaust shop and they said that the precat pipes were bent so they re routed the pipes and now it's good.

Similar Threads

  1. AW4 Swap: Problems-Wiring?
    By Steve2kXJ in forum OEM/Factory
    Replies: 1
    Last Post: 02-10-2015, 11:45 PM
  2. Some new problems
    By Tobyspaw in forum OEM/Factory
    Replies: 5
    Last Post: 09-28-2014, 06:35 PM
  3. NSS problems
    By bcso290 in forum OEM/Factory
    Replies: 24
    Last Post: 03-06-2013, 02:31 PM
  4. 91 xj problems
    By samori in forum General Talk
    Replies: 1
    Last Post: 10-16-2012, 10:44 PM
  5. A/C problems
    By Jeepster19 in forum OEM/Factory
    Replies: 11
    Last Post: 06-26-2009, 05:44 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •