4.0 HO Intake 2 Renix 4.0

[dragordie]

Can it be done with little to no mods? I have a complete 92 4.0 HO intake with injectors . I have the complete fuel lines excel cables all from the 92. I want to put it on my 89 Renix so I can change the exhaust man over to a header. any one know if its going to be easy?
Dave<><

|_______
[l_|__\___\,___
l--___--_[=lllllll=]
()_)' ' ()_)---o-)_)

Wheeling For Christ in a Cherokee

[4.3LXJ]

Blue would be the expert on this, but you are going to have to make sure you have all the sensors for the Renix in place and working. To my knowledge the sensors don't interchange.

I think the best thing would be to change the head too along with the wiring harness and ECM and open cooling system, then you would have a complete 4.0 HO

[BlueXJ]

Blue says yes but the H.O. TB must be adapted to use the Renix sensors and that is very involved. Bottom line answer is yes with those restrictions.
Easiest would be a plate to allow the Renix TB to be bolted to the H.O. manifold. A machine shop could build one for you but you need to take them the manifold and the Renix TB.