Results 1 to 5 of 5

Thread: Wiring harness

  1. #1
    503JeepHeep Guest

    Default Wiring harness

    So long story short, I ended up getting a 99 cherokee that was totalled but has a spanking new 4.0. I found a 95 chassis that was straight so I'm working on a swap. I ran into the problem of wiring the harness in. Should I just splice the plug so the 99 can plug into the 95 chassis or should I just change everything on the motor to accept 95 parts? I got a quote on that and ot came to about 400. I'm sure there's a cheaper way of doing it but I'm just not sure what direction to head without ruining the harness or ECU. Any help would be greatly appreciated.

    Sent from my SM-G965U using Tapatalk

  2. #2
    prerunner1982's Avatar
    prerunner1982 is offline Level: Uber Jeep Cherokee Trailer Queen
    Join Date
    Jun 2009
    Location
    Edmond, OK
    Posts
    5,013

    Default Re: Wiring harness

    I would get the correct sensors for the 95.
    Since the 95 is OBD1 and the 99 is OBD2 I am not sure how the 99 sensors would affect the 95 computer.
    1993 2 door 4x4 4.0 5 speed
    1997 4 door 4x2 4.0 auto RIP 6/6/2016
    2000 4 door 4x2 4.0 auto


    Day of Dirt Adventure

  3. #3
    Join Date
    Sep 2009
    Location
    Chico, CA
    Posts
    29,847

    Default Re: Wiring harness

    Use the 95 intake, which has most sensors on it and change the others over from the 95 and use the 95 computer and wiring harness and you will have it
    230 hp 4.3L Chevy
    Built 4L60E with manual lockout
    Atlas 4 speed
    Griffin radiator
    On board air
    Warn 9.5ti on custom bumper
    7.5" RE front and bastard pack rear on custom long arms
    30 gal gas tank
    lockers
    And a bunch of other stuff

  4. #4
    503JeepHeep Guest

    Default Re: Wiring harness

    Awesome thanks for the quick responses, I'll see if I have the intake around and that makes sense, not wanting to cross OBDI and II

    Sent from my SM-G965U using Tapatalk

  5. #5
    503JeepHeep Guest

    Default Re: Wiring harness

    So I found the intake, now to swap out the 02, the crank, I feel like I'm missing more

    Sent from my SM-G965U using Tapatalk

Similar Threads

  1. Wiring older trans harness to 2000 xj
    By borjawil in forum OEM/Factory
    Replies: 2
    Last Post: 10-04-2016, 10:02 PM
  2. Melting wiring harness to headlights
    By jason2187 in forum Electrical and Audio Tips! from JEEP TALK SHOW! Podcast
    Replies: 9
    Last Post: 05-24-2015, 12:55 PM
  3. Got a OEM trailer hitch with wiring harness?
    By Crist Clapper in forum OEM/Factory
    Replies: 15
    Last Post: 04-17-2014, 07:59 AM
  4. Wiring harness / dielectric grease
    By Infidel Edition in forum Electrical and Audio Tips! from JEEP TALK SHOW! Podcast
    Replies: 4
    Last Post: 10-06-2013, 07:35 PM
  5. Overhead console wiring harness 97+ wanted
    By amunoz in forum Wanted! (To buy)
    Replies: 0
    Last Post: 04-21-2012, 05:25 AM

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •