Page 1 of 2 12 LastLast
Results 1 to 15 of 20

Thread: My project...

  1. #1
    Join Date
    Feb 2017
    Location
    California
    Posts
    22
    Chats
    4

    Default My project...

    Photos will come...

  2. #2
    Join Date
    Feb 2017
    Location
    California
    Posts
    22
    Chats
    4

    Default Re: My project...



    Sent from my SM-G935P using Tapatalk
    1999 first time 4x4

    Cherokee LIFE!!!

  3. #3
    Join Date
    Feb 2017
    Location
    California
    Posts
    22
    Chats
    4

    Default Re: My project...



    Sent from my SM-G935P using Tapatalk
    1999 first time 4x4

    Cherokee LIFE!!!

  4. #4
    Join Date
    Feb 2017
    Location
    California
    Posts
    22
    Chats
    4

    Default Re: My project...



    Sent from my SM-G935P using Tapatalk
    1999 first time 4x4

    Cherokee LIFE!!!

  5. #5
    Join Date
    Aug 2009
    Location
    Asheville, NC
    Posts
    7,955
    Chats
    39048

    Default Re: My project...

    Those are some nice looking engine parts you got there.. What pistons/rods you running?? and what displacement are you looking to run in the end (are you making it a stroker build or just back to 4.0??
    FORMER GREEN XJ CLUB MEMBER
    IF YOU DON'T STAND BEHIND OUR TROOPS, FEEL FREE TO STAND IN FRONT OF THEM!!
    DOING SOMETHING JUST BECAUSE YOUR BUDDY DOES IT THAT WAY MAKES AS MUCH SENSE AS SHARING TOOTHBRUSHES

  6. #6
    Join Date
    Feb 2017
    Location
    California
    Posts
    22
    Chats
    4

    Default Re: My project...

    Just back to 4.0... im not sure what the pistons are.. but I will chack today... they were a xmas gift. As for the rods im re-using the the stock ones from the motor we tore down... 4.0 cherokee Loredo. Displacement is not something I have looked into yet, Im not even 100 percent what it is... how much power to the wheels/individual wheels, gear ratio? I was probably going to ask you guys here at tje forums for suggestions. I was looking at some stroker kits but I was trying to use the new cam and pistons I already have... any good suggestions on where to look? (Original plan was back to 4.0, but I still have time to change my mind.)

    Sent from my SM-G935P using Tapatalk
    1999 first time 4x4

    Cherokee LIFE!!!

  7. #7
    Join Date
    Feb 2017
    Location
    California
    Posts
    22
    Chats
    4

    Default Re: My project...

    http://i97.photobucket.com/albums/l2...g?t=1291937711

    I want these fenders... anyone know where to find stuff like this? Other than on the race coarse... All I keep finding are fender flares... I'm looking for a more rugged look...
    Last edited by TunzofunXJ99; 02-07-2017 at 07:06 PM.

  8. #8
    Join Date
    Aug 2009
    Location
    Asheville, NC
    Posts
    7,955
    Chats
    39048

    Default Re: My project...

    Quote Originally Posted by TunzofunXJ99 View Post
    http://i97.photobucket.com/albums/l2...g?t=1291937711

    I want these fenders... anyone know where to find stuff like this? Other than on the race coarse... All I keep finding are fender flares... I'm looking for a more rugged look...
    Rusty's offroad makes a set... I would say stay away from them unless you want to spend quite a bit of time fitting them and making them work... Good companies wise there are a few options.. Hannemann Fiberglass, Glassworks Unlimited (they only make front sets), there are probably some more companies... those are just the ones that I know of, from when I was looking up those style fenders.. If you want to find more, just search for Jeepspeed fiberglass fenders..
    FORMER GREEN XJ CLUB MEMBER
    IF YOU DON'T STAND BEHIND OUR TROOPS, FEEL FREE TO STAND IN FRONT OF THEM!!
    DOING SOMETHING JUST BECAUSE YOUR BUDDY DOES IT THAT WAY MAKES AS MUCH SENSE AS SHARING TOOTHBRUSHES

  9. #9
    Join Date
    Feb 2017
    Location
    California
    Posts
    22
    Chats
    4

    Default Re: My project...

    Sweet thanks... again I appreciate it.

  10. #10
    Join Date
    Feb 2017
    Location
    California
    Posts
    22
    Chats
    4

    Default Re: My project...



    Sent from my SM-G935P using Tapatalk
    1999 first time 4x4

    Cherokee LIFE!!!

  11. #11
    Join Date
    Feb 2017
    Location
    California
    Posts
    22
    Chats
    4

    Default Re: My project...



    Sent from my SM-G935P using Tapatalk
    1999 first time 4x4

    Cherokee LIFE!!!

  12. #12
    Join Date
    Feb 2017
    Location
    California
    Posts
    22
    Chats
    4

    Default Re: My project...



    Sent from my SM-G935P using Tapatalk
    1999 first time 4x4

    Cherokee LIFE!!!

  13. #13
    denverd1's Avatar
    denverd1 is offline Level: Uber Jeep Cherokee Trailer Queen
    Join Date
    Dec 2011
    Location
    Tyler, Texas
    Posts
    5,729
    Chats
    1261

    Default Re: My project...

    you'd have to use stroker rods and crank to get more displacement. may want a different cam profile as well. so you'd have to start over on parts...
    Last edited by denverd1; 03-10-2017 at 02:50 PM.
    Wheelin' East Texas in a RED XJ

    RED 98 XJ with 4.5" lift, ZJ steering, front and rear locked on 33's
    cowl intake, Cobra CB, SYE, bumpers, 10K winch, lights
    ,___________
    //___l__,\____\,00_
    l_--- \___l---[]lllllll[]|
    (o)_)--(o)_)--(o)_)

  14. #14
    Join Date
    Feb 2017
    Location
    California
    Posts
    22
    Chats
    4

    Default Re: My project...

    Yea I am not sure because the knowledge for me isn't there... but I don't think I am doing anything to the displacement... all I really know is I don't want to start over on parts... just gonna put it together and see what we get I guess... (as I typed that last part I hated myself...)

  15. #15
    denverd1's Avatar
    denverd1 is offline Level: Uber Jeep Cherokee Trailer Queen
    Join Date
    Dec 2011
    Location
    Tyler, Texas
    Posts
    5,729
    Chats
    1261

    Default Re: My project...

    you could put higher ratio rocker arms for change your int/exh profile!
    Wheelin' East Texas in a RED XJ

    RED 98 XJ with 4.5" lift, ZJ steering, front and rear locked on 33's
    cowl intake, Cobra CB, SYE, bumpers, 10K winch, lights
    ,___________
    //___l__,\____\,00_
    l_--- \___l---[]lllllll[]|
    (o)_)--(o)_)--(o)_)

Page 1 of 2 12 LastLast

Similar Threads

  1. TJ Project
    By JENSSEN in forum Body Repair
    Replies: 34
    Last Post: 05-28-2016, 12:37 AM
  2. My New Project
    By matchframe in forum General Talk
    Replies: 7
    Last Post: 03-17-2015, 05:13 PM
  3. Another project!
    By KMW-NWXJ in forum General Talk
    Replies: 11
    Last Post: 07-08-2014, 07:31 PM
  4. Welcome project-xj!!!
    By BlueXJ in forum New Member Introductions
    Replies: 2
    Last Post: 08-02-2013, 03:33 PM
  5. New project ???
    By steph74 in forum OEM/Factory
    Replies: 5
    Last Post: 01-03-2012, 12:48 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •