Results 1 to 11 of 11
  1. #1
    Join Date
    Oct 2016
    Location
    US ILLINOIS
    Posts
    55
    Chats
    0

    Default Alignment xj 2001

    The rear end of my jeep's alignment is 15 degrees off anyone to have any ideas how to get it straight

    Sent from my SM-G930V using Tapatalk

  2. #2
    Join Date
    Sep 2009
    Location
    Chico, CA
    Posts
    29,692
    Chats
    1838

    Default Re: Alignment xj 2001

    Are you talking about tires or pinion angle?
    230 hp 4.3L Chevy
    Built 4L60E with manual lockout
    Atlas 4 speed
    Griffin radiator
    On board air
    Warn 9.5ti on custom bumper
    7.5" RE front and bastard pack rear on custom long arms
    30 gal gas tank
    lockers
    And a bunch of other stuff

  3. #3
    Join Date
    Oct 2016
    Location
    US ILLINOIS
    Posts
    55
    Chats
    0

    Default Re: Alignment xj 2001

    Tyres I believe I just took it in and they got the front all good they just told me that the rear it out

    Sent from my SM-G930V using Tapatalk

  4. #4
    Join Date
    Sep 2009
    Location
    Chico, CA
    Posts
    29,692
    Chats
    1838

    Default Re: Alignment xj 2001

    15 is huge. Can I see a pic of both sides?
    230 hp 4.3L Chevy
    Built 4L60E with manual lockout
    Atlas 4 speed
    Griffin radiator
    On board air
    Warn 9.5ti on custom bumper
    7.5" RE front and bastard pack rear on custom long arms
    30 gal gas tank
    lockers
    And a bunch of other stuff

  5. #5
    Join Date
    Oct 2016
    Location
    US ILLINOIS
    Posts
    55
    Chats
    0

    Default Re: Alignment xj 2001



    Sent from my SM-G930V using Tapatalk

  6. #6
    Join Date
    Sep 2009
    Location
    Chico, CA
    Posts
    29,692
    Chats
    1838

    Default Re: Alignment xj 2001

    Thanks for the pics. I don't see any 15 there. Are the wheels still in the same position in the wheel well on both sides? Show me those pics from the side
    230 hp 4.3L Chevy
    Built 4L60E with manual lockout
    Atlas 4 speed
    Griffin radiator
    On board air
    Warn 9.5ti on custom bumper
    7.5" RE front and bastard pack rear on custom long arms
    30 gal gas tank
    lockers
    And a bunch of other stuff

  7. #7
    Join Date
    Oct 2016
    Location
    US ILLINOIS
    Posts
    55
    Chats
    0

    Default Re: Alignment xj 2001



    Sent from my SM-G930V using Tapatalk

  8. #8
    Join Date
    Sep 2009
    Location
    Chico, CA
    Posts
    29,692
    Chats
    1838

    Default Re: Alignment xj 2001

    Aha, just as I suspected. You have a broken center pin in the leaf springs. Not the end of the world. A 2 part at most parts stores. Make sure it is a real center bolt, don't try to make one by rounding the head. You will have to take the spring loose from the axle and drop the axle down far enough to replace the bolt from the bottom
    230 hp 4.3L Chevy
    Built 4L60E with manual lockout
    Atlas 4 speed
    Griffin radiator
    On board air
    Warn 9.5ti on custom bumper
    7.5" RE front and bastard pack rear on custom long arms
    30 gal gas tank
    lockers
    And a bunch of other stuff

  9. #9
    Join Date
    Oct 2016
    Location
    US ILLINOIS
    Posts
    55
    Chats
    0

    Default Re: Alignment xj 2001

    Ok so here's my next question would a lift kit remedy that I ordered a rough country 3inch lift

    Sent from my SM-G930V using Tapatalk

  10. #10
    Join Date
    Sep 2009
    Location
    Chico, CA
    Posts
    29,692
    Chats
    1838

    Default Re: Alignment xj 2001

    Whether you got the add a leaf or new spring pack, the answer is yes
    230 hp 4.3L Chevy
    Built 4L60E with manual lockout
    Atlas 4 speed
    Griffin radiator
    On board air
    Warn 9.5ti on custom bumper
    7.5" RE front and bastard pack rear on custom long arms
    30 gal gas tank
    lockers
    And a bunch of other stuff

  11. #11
    Join Date
    Oct 2016
    Location
    US ILLINOIS
    Posts
    55
    Chats
    0

    Default Re: Alignment xj 2001

    I got an add a leaf and I appreciate all your help thank you so much

    Sent from my SM-G930V using Tapatalk

Similar Threads

  1. Alignment
    By chuck2000xj in forum OEM/Factory
    Replies: 16
    Last Post: 11-18-2015, 10:47 AM
  2. Flexplate alignment?
    By StumpyXJ69 in forum General Talk
    Replies: 4
    Last Post: 10-29-2015, 10:16 AM
  3. Pulley alignment
    By OGCollard in forum General Talk
    Replies: 3
    Last Post: 09-30-2015, 05:49 PM
  4. Long arm alignment
    By altonamud in forum Modified
    Replies: 18
    Last Post: 01-08-2014, 08:17 PM
  5. **Front alignment help**
    By rm2406 in forum OEM/Factory
    Replies: 11
    Last Post: 01-03-2013, 10:57 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •