Ok, I'm getting an occasional 1391 code. Warmed up at a red light in gear it will just drop off a little in the RPMs. Runs fine otherwise. Do I need to worry or not? Cam or crank sensor? 2001 4.0 auto.
Tapatalk is active for this site! Just go to your phone's store to download and install.
|
Not registered as a member yet?
|
 |
|||
| Okay I get it you're not sure if we measure up yet. No problem look around and we think you'll find some good info and a lot of good people here all willing to help and not flame you when you ask a question. | ||||
 |
2001 XJ
P01391
Ok, I'm getting an occasional 1391 code. Warmed up at a red light in gear it will just drop off a little in the RPMs. Runs fine otherwise. Do I need to worry or not? Cam or crank sensor? 2001 4.0 auto.
KE0CRP
Re: Po1391
Could be either one Scott. I looked up the code in a 1999 FSM and it shows that cam and crank sensor can trip that code. Might be best to do some testing or at least throw the parts in the glovebox.
"Just some guy"
Re: P01391
I'm not saying this is the issue but that CPS is a magnet, so it can attract metal shavings that stick to it. If you've noticed a bad spot while starting or it doesn't sound right when starting maybe you have some metal shavings on the sensor.
Wouldn't hurt to take it out and check it.
Of course disconnecting and reconnecting it on top of the intake would be the first thing I would try.
You could also try clearing the ECM.
Take the positive cable OFF the battery and touch it to ground for 30 seconds.
Verify this is correct for your 2001 before doing it.
Reply With Quote
Bookmarks