Results 1 to 6 of 6
  1. #1
    Join Date
    Nov 2015
    Location
    tucson
    Posts
    2
    Chats
    0

    Default Passenger door lock rod clip installation

    Hi,
    My passenger door handle (1999 Jeep Cherokee Sport) quit working from the outside (works from inside). I have taken the door apart and found the plastic clip on a short metal rod is broken and the rod no longer attaches to the door lock/handle mechanism. Any help with finding this clip (part J005532- or 4658677) I already tried Jeep factory parts, no longer available. Also any help on replacing the clip it looks tight.
    Tucson Jeep

  2. #2
    Join Date
    Sep 2009
    Location
    Chico, CA
    Posts
    29,691
    Chats
    1838

    Default Re: passenger door lock rod clip installation

    I get mine at the pick and pull. Most of them will let you have it for the price of admission
    230 hp 4.3L Chevy
    Built 4L60E with manual lockout
    Atlas 4 speed
    Griffin radiator
    On board air
    Warn 9.5ti on custom bumper
    7.5" RE front and bastard pack rear on custom long arms
    30 gal gas tank
    lockers
    And a bunch of other stuff

  3. #3
    Join Date
    Nov 2015
    Location
    tucson
    Posts
    2
    Chats
    0

    Default Re: Passenger door lock rod clip installation

    I was able to purchase the clips (new) at Team Cherokee (Teamcherokee.com). They were reasonably priced at 4.98 but shipping was high 12.99. I will repost once I receive them and verify they fit.

  4. #4
    Join Date
    Aug 2009
    Location
    Asheville, NC
    Posts
    7,960
    Chats
    39048

    Default Re: Passenger door lock rod clip installation

    All my clips are in good condition on mine still, and I have a few spares... and have been thinking of canning some off of the only 01 that is in the JY this coming weekend.. now if I could just figure out why I can unlock the doors just fine from outside when the inside forward door lock tabs are not connected... but when I connect them back, I can't lock the doors from inside or using the key... I've tried everything I can to fix this issue, and have had no luck on it... Thinking about trying to pull the door latch portion of the locks on the 01 in the JY as well as the rods connecting them... and see fi that'll help elevate the situation I'm having..
    FORMER GREEN XJ CLUB MEMBER
    IF YOU DON'T STAND BEHIND OUR TROOPS, FEEL FREE TO STAND IN FRONT OF THEM!!
    DOING SOMETHING JUST BECAUSE YOUR BUDDY DOES IT THAT WAY MAKES AS MUCH SENSE AS SHARING TOOTHBRUSHES

  5. #5
    Join Date
    Mar 2013
    Location
    hanover pa
    Posts
    1,447
    Chats
    1

    Default Re: Passenger door lock rod clip installation

    They are a pain...had that problem when i replaced my window motor. Found rod was slightly bent.

    Sent from my SAMSUNG-SGH-I547 using Tapatalk

  6. #6
    Join Date
    Aug 2009
    Location
    Asheville, NC
    Posts
    7,960
    Chats
    39048

    Default Re: Passenger door lock rod clip installation

    Quote Originally Posted by autotech98 View Post
    They are a pain...had that problem when i replaced my window motor. Found rod was slightly bent.

    Sent from my SAMSUNG-SGH-I547 using Tapatalk
    Yeah that was what I was figuring.. have tried to straighten them back or adjust them back to where I assume they should be, with no real remedy... so I can only lock/unlock using the key or the power locks for now...
    FORMER GREEN XJ CLUB MEMBER
    IF YOU DON'T STAND BEHIND OUR TROOPS, FEEL FREE TO STAND IN FRONT OF THEM!!
    DOING SOMETHING JUST BECAUSE YOUR BUDDY DOES IT THAT WAY MAKES AS MUCH SENSE AS SHARING TOOTHBRUSHES

Similar Threads

  1. Replies: 22
    Last Post: 09-20-2016, 07:44 AM
  2. Door cylinder lock?
    By Gravedigger in forum OEM/Factory
    Replies: 8
    Last Post: 12-22-2014, 10:40 AM
  3. Passenger Door Locking
    By White98 in forum OEM/Factory
    Replies: 6
    Last Post: 06-30-2013, 12:14 AM
  4. Passenger door lock
    By Baddmove in forum OEM/Factory
    Replies: 3
    Last Post: 11-12-2012, 06:59 PM
  5. Jeep XJ Door Sill Installation - Simple Stuff
    By Mudderoy in forum Technical "HOW TO" Articles
    Replies: 2
    Last Post: 05-29-2012, 09:26 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •