Results 1 to 7 of 7

Thread: AW4 quick disconnects at Trans

  1. #1
    Join Date
    Apr 2014
    Location
    Arizona
    Posts
    39

    Default AW4 quick disconnects at Trans

    (97 XJ AW4)
    I am replacing the quick disconnects at the transmission...and have a question about the part in the pic p/n 800-714 from Dorman says its a direct replacement...my question is how do you attach the new connectors to the old line? do I have to remove the clip from the new connector then slip it on the line then push back into the connector?
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Dorman 800-714.jpg 
Views:	16 
Size:	299.9 KB 
ID:	7852  

  2. #2
    Join Date
    Oct 2012
    Location
    the wild north
    Posts
    302

    Default Re: AW4 quick disconnects at Trans

    Yes, I replaced mine this this way due to the old ones leaking. You will now need a tool to take them off in the future.

  3. #3
    Join Date
    Apr 2014
    Location
    Arizona
    Posts
    39

    Default Re: AW4 quick disconnects at Trans

    I just dropped the trans to replace the flexplate and I used a pair of curved hose pliers to press the clips and remove the lines wasnt too bad but they seem old and worn so I want to replace them before I loose all the trans fluid goin down the road. So it is pretty easy to replace/attach the new connectors? is the Dorman the one you used?

  4. #4
    Join Date
    Oct 2012
    Location
    the wild north
    Posts
    302

    Default Re: AW4 quick disconnects at Trans

    it was not to bad of a job one of them is in a weird location to get to but other then that is was under 15 of work after i got both of them . yes i used the doorman part.

    to take the old line off you will use the plastic deal that is on the line then breack if off the new adapters will not use them. To reassemble just push the line in the adapters until they click give a tough to see if they are in all the way if so then you are done!

  5. #5
    Join Date
    Apr 2014
    Location
    Arizona
    Posts
    39

    Default Re: AW4 quick disconnects at Trans

    So basically *just break the old clip off of the line and push it into the new connector till it clicks and ...BOOM done...do i have it right? sounds pretty straightforward. ..Thanks!

  6. #6
    Join Date
    Oct 2012
    Location
    the wild north
    Posts
    302

    Default Re: AW4 quick disconnects at Trans

    Yeppers. Well I guess you all so need to remove the old hardware lol

  7. #7
    Join Date
    Apr 2014
    Location
    Arizona
    Posts
    39

    Talking Re: AW4 quick disconnects at Trans

    Oh yea...cant forget that step...lol

Similar Threads

  1. Quick disconnects
    By Pastorjosh in forum Wanted! (To buy)
    Replies: 4
    Last Post: 02-21-2015, 12:43 PM
  2. Quick disconnects - Feedback?
    By Dredwolf in forum Modified
    Replies: 59
    Last Post: 02-16-2013, 12:02 PM
  3. Replies: 46
    Last Post: 10-10-2011, 05:38 PM
  4. disconnects
    By cantab27 in forum Modified
    Replies: 24
    Last Post: 12-08-2010, 03:01 PM
  5. Quick disconnects
    By Dirt Dogg Rydas in forum Modified
    Replies: 43
    Last Post: 12-02-2010, 09:18 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •