Results 1 to 7 of 7

Thread: 1992/1993 transfer case swap help!

  1. #1
    Join Date
    Jul 2013
    Location
    Abingdon, Md
    Posts
    118

    Default 1992/1993 transfer case swap help!

    Hello, I swapped the transfer case out of my 92 xj with one out of a 93. Both are 231's. Both were exactly the same with the exception of the one plug on the tail end of the transfer case that sets on top of the housing where the rear driveshaft is. I can't remember right off which was which but one was for a 2 prong set up and the other was a 3 prong set up. I did not notice this until after it was in and that was the only thing left to hook up as far as wires go anyway. What's the easiest was to fix this issue? Thanks in advance!
    Anything that will break, will break on me!

    2000 xj limited 4.0 ho, automatic
    open d35 (for now) 3.55s
    open d30 (for now) 3.55s
    rc 3" leaf springs, adjustable 1.5" to 2" shackles
    re 4.5" coils up front
    rc hd trac bar and bracket
    rc hd adjustable lca's
    rustys throttle body spacer
    rugged ridge 1.5" wheel spacers
    air aid cold air intake
    mossy oak seat covers and a decent sound system
    more to come soon

  2. #2
    Join Date
    Sep 2009
    Location
    Chico, CA
    Posts
    29,847

    Default Re: 1992/1993 transfer case swap help!

    That would be speed sensor. It should unscrew. Just swap them
    Last edited by 4.3LXJ; 03-16-2015 at 05:08 PM.
    230 hp 4.3L Chevy
    Built 4L60E with manual lockout
    Atlas 4 speed
    Griffin radiator
    On board air
    Warn 9.5ti on custom bumper
    7.5" RE front and bastard pack rear on custom long arms
    30 gal gas tank
    lockers
    And a bunch of other stuff

  3. #3
    Join Date
    Jul 2013
    Location
    Abingdon, Md
    Posts
    118

    Default Re: 1992/1993 transfer case swap help!

    Alright thanks again Steve! Is there any way to do it without pulling the transfer case back out again?
    Anything that will break, will break on me!

    2000 xj limited 4.0 ho, automatic
    open d35 (for now) 3.55s
    open d30 (for now) 3.55s
    rc 3" leaf springs, adjustable 1.5" to 2" shackles
    re 4.5" coils up front
    rc hd trac bar and bracket
    rc hd adjustable lca's
    rustys throttle body spacer
    rugged ridge 1.5" wheel spacers
    air aid cold air intake
    mossy oak seat covers and a decent sound system
    more to come soon

  4. #4
    Join Date
    Sep 2009
    Location
    Chico, CA
    Posts
    29,847

    Default Re: 1992/1993 transfer case swap help!

    We are talking about a plug on the tail housing right?
    230 hp 4.3L Chevy
    Built 4L60E with manual lockout
    Atlas 4 speed
    Griffin radiator
    On board air
    Warn 9.5ti on custom bumper
    7.5" RE front and bastard pack rear on custom long arms
    30 gal gas tank
    lockers
    And a bunch of other stuff

  5. #5
    Join Date
    Jul 2013
    Location
    Abingdon, Md
    Posts
    118

    Default Re: 1992/1993 transfer case swap help!

    Yes. I just looked again and feel stupid now. Its fixed. I couldn't remember exactly what it looked like and wasn't home when I posted. Just got home and looked. Already fixed it.
    Anything that will break, will break on me!

    2000 xj limited 4.0 ho, automatic
    open d35 (for now) 3.55s
    open d30 (for now) 3.55s
    rc 3" leaf springs, adjustable 1.5" to 2" shackles
    re 4.5" coils up front
    rc hd trac bar and bracket
    rc hd adjustable lca's
    rustys throttle body spacer
    rugged ridge 1.5" wheel spacers
    air aid cold air intake
    mossy oak seat covers and a decent sound system
    more to come soon

  6. #6
    Join Date
    Sep 2009
    Location
    Chico, CA
    Posts
    29,847

    Default Re: 1992/1993 transfer case swap help!

    Okie dokie Brandon
    230 hp 4.3L Chevy
    Built 4L60E with manual lockout
    Atlas 4 speed
    Griffin radiator
    On board air
    Warn 9.5ti on custom bumper
    7.5" RE front and bastard pack rear on custom long arms
    30 gal gas tank
    lockers
    And a bunch of other stuff

  7. #7
    Join Date
    Jul 2013
    Location
    Abingdon, Md
    Posts
    118

    Default Re: 1992/1993 transfer case swap help!

    Thanks again though.
    Anything that will break, will break on me!

    2000 xj limited 4.0 ho, automatic
    open d35 (for now) 3.55s
    open d30 (for now) 3.55s
    rc 3" leaf springs, adjustable 1.5" to 2" shackles
    re 4.5" coils up front
    rc hd trac bar and bracket
    rc hd adjustable lca's
    rustys throttle body spacer
    rugged ridge 1.5" wheel spacers
    air aid cold air intake
    mossy oak seat covers and a decent sound system
    more to come soon

Similar Threads

  1. 1996+ Dash Swap into 1992 (OBDI-OBDII)
    By willcomsto in forum Modified
    Replies: 10
    Last Post: 10-16-2012, 01:40 PM
  2. Transfer Case Oil
    By jccatt in forum OEM/Factory
    Replies: 10
    Last Post: 07-14-2011, 04:31 PM
  3. Transfer case
    By OrangeXJ in forum OEM/Factory
    Replies: 15
    Last Post: 06-27-2010, 10:10 AM
  4. WTB- 242 Transfer Case
    By firehawk in forum Wanted! (To buy)
    Replies: 3
    Last Post: 06-05-2010, 10:12 AM
  5. transfer case help
    By lowrider in forum Technical "HOW TO" Articles
    Replies: 11
    Last Post: 12-15-2009, 06:33 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •