Results 1 to 5 of 5

Thread: Lunati voodoo can

  1. #1
    Pookapotamus's Avatar
    Pookapotamus is offline Level: Uber Jeep Cherokee Trailer Queen
    Join Date
    Dec 2011
    Location
    Calgary, AB, Canada
    Posts
    1,739

    Default Lunati voodoo can

    Any one have experience with this cam or company? Part number ending in 700

    I'm considering swapping out my comp cams extreme 4x4 cam, Tony's recent engine failure, and Mort's valvetrain is starting to get louder, kinda has me worried. Plus I want to degree the cam and do a little work to the block and connecting rods and change the length of the pushrods.

    These cams are very very close to each other and I keep hearing about problems with the 4x4 cam. Now I haven't pulled the valve cover and pulled out the lifters yet to check, and if the cam is still good I will probably keep it, but if it is starting to wear I want it gone, but want to stay close to the advantages of this cam, like I said the specs on the voodoo are very close and 200 to swap it is not bad.

    So anyone know anything about them???
    Last edited by Pookapotamus; 12-18-2014 at 09:53 PM.

  2. #2
    Join Date
    Aug 2009
    Location
    Asheville, NC
    Posts
    7,962

    Default Re: Lunati voodoo can

    Don't know anything about them as far as the 4.0 goes, but when I was in HS I helped a guy install their 383ci engine kit in his Camino's engine, and that thing was a beast and he ran it hard every weekend at the track, and DD'd it every day for many years after the build... with no issues... and know of a few others that run Lunati cams in their LS's and 350's with no issues... so I'd think should be good on the 4.0... then again Comp Cam's has awesome years worth of products..
    FORMER GREEN XJ CLUB MEMBER
    IF YOU DON'T STAND BEHIND OUR TROOPS, FEEL FREE TO STAND IN FRONT OF THEM!!
    DOING SOMETHING JUST BECAUSE YOUR BUDDY DOES IT THAT WAY MAKES AS MUCH SENSE AS SHARING TOOTHBRUSHES

  3. #3
    denverd1's Avatar
    denverd1 is offline Level: Uber Jeep Cherokee Trailer Queen
    Join Date
    Dec 2011
    Location
    Tyler, Texas
    Posts
    5,762

    Default Re: Lunati voodoo can

    good cams. some of them pretty high lift, so just make sure your springs and valve retainers are up to the lift although the 4.0 doesn't spin too fast.
    Wheelin' East Texas in a RED XJ

    RED 98 XJ with 4.5" lift, ZJ steering, front and rear locked on 33's
    cowl intake, Cobra CB, SYE, bumpers, 10K winch, lights
    ,___________
    //___l__,\____\,00_
    l_--- \___l---[]lllllll[]|
    (o)_)--(o)_)--(o)_)

  4. #4
    Pookapotamus's Avatar
    Pookapotamus is offline Level: Uber Jeep Cherokee Trailer Queen
    Join Date
    Dec 2011
    Location
    Calgary, AB, Canada
    Posts
    1,739

    Default Re: Lunati voodoo can

    I'm going to have to pull the valve cover and do some inspecting, thanks for the info guys, the voodoo can is looking like a great option

  5. #5
    denverd1's Avatar
    denverd1 is offline Level: Uber Jeep Cherokee Trailer Queen
    Join Date
    Dec 2011
    Location
    Tyler, Texas
    Posts
    5,762

    Default Re: Lunati voodoo can

    Can't wait to hear your feedback

    Love a good cam swap. Roller lifts pls?

    BTW don't know what that lunati will run but you could get a custom cam for close....
    Last edited by denverd1; 12-20-2014 at 04:17 AM.
    Wheelin' East Texas in a RED XJ

    RED 98 XJ with 4.5" lift, ZJ steering, front and rear locked on 33's
    cowl intake, Cobra CB, SYE, bumpers, 10K winch, lights
    ,___________
    //___l__,\____\,00_
    l_--- \___l---[]lllllll[]|
    (o)_)--(o)_)--(o)_)

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •