Page 1 of 2 12 LastLast
Results 1 to 15 of 17

Thread: Np242

  1. #1
    Join Date
    May 2014
    Location
    valdosta ga
    Posts
    9

    Default Np242

    im getting a loud poping in 4low

  2. #2
    Join Date
    Sep 2009
    Location
    Chico, CA
    Posts
    29,847

    Default Re: np242

    Sounds like a u joint issue
    230 hp 4.3L Chevy
    Built 4L60E with manual lockout
    Atlas 4 speed
    Griffin radiator
    On board air
    Warn 9.5ti on custom bumper
    7.5" RE front and bastard pack rear on custom long arms
    30 gal gas tank
    lockers
    And a bunch of other stuff

  3. #3
    Join Date
    May 2014
    Location
    valdosta ga
    Posts
    9

    Default Re: np242

    i have had them looked at they seem fine it also pops in 4low in reverse also

  4. #4
    Join Date
    Sep 2009
    Location
    Chico, CA
    Posts
    29,847

    Default Re: np242

    Not in 4 hi?
    230 hp 4.3L Chevy
    Built 4L60E with manual lockout
    Atlas 4 speed
    Griffin radiator
    On board air
    Warn 9.5ti on custom bumper
    7.5" RE front and bastard pack rear on custom long arms
    30 gal gas tank
    lockers
    And a bunch of other stuff

  5. #5
    Join Date
    May 2014
    Location
    valdosta ga
    Posts
    9

    Default Re: np242

    Pops in 4hi part time not as much in full time and really bad in 4low ,

  6. #6
    Join Date
    Sep 2009
    Location
    Chico, CA
    Posts
    29,847

    Default Re: np242

    Gonna stand by the U joint thing. Check the CV joint in the front drive line closely. That is the first thing I would look at.
    230 hp 4.3L Chevy
    Built 4L60E with manual lockout
    Atlas 4 speed
    Griffin radiator
    On board air
    Warn 9.5ti on custom bumper
    7.5" RE front and bastard pack rear on custom long arms
    30 gal gas tank
    lockers
    And a bunch of other stuff

  7. #7
    Join Date
    May 2014
    Location
    valdosta ga
    Posts
    9

    Default Re: np242

    How do i check them out?

  8. #8
    Join Date
    Sep 2009
    Location
    Chico, CA
    Posts
    29,847

    Default Re: np242

    You will need to remove the shaft. It is probably the ball and socket in the center that is giving you trouble
    230 hp 4.3L Chevy
    Built 4L60E with manual lockout
    Atlas 4 speed
    Griffin radiator
    On board air
    Warn 9.5ti on custom bumper
    7.5" RE front and bastard pack rear on custom long arms
    30 gal gas tank
    lockers
    And a bunch of other stuff

  9. #9
    Join Date
    May 2014
    Location
    valdosta ga
    Posts
    9

    Default Re: np242

    can you show me a picture please

  10. #10
    Join Date
    Sep 2009
    Location
    Chico, CA
    Posts
    29,847

    Default Re: np242

    Best place pictures for drivelines is the Tom Woods Drive Line website. He makes all kinds and sizes and has great pics of each type
    230 hp 4.3L Chevy
    Built 4L60E with manual lockout
    Atlas 4 speed
    Griffin radiator
    On board air
    Warn 9.5ti on custom bumper
    7.5" RE front and bastard pack rear on custom long arms
    30 gal gas tank
    lockers
    And a bunch of other stuff

  11. #11
    Join Date
    May 2014
    Location
    valdosta ga
    Posts
    9

    Default Re: np242

    why wouldnt to do it in 2wd?

  12. #12
    Join Date
    Sep 2009
    Location
    Chico, CA
    Posts
    29,847

    Default Re: np242

    No pressure on the front drive train. When you shift it in then there is horsepower applied to everything and stuff like that will show up
    230 hp 4.3L Chevy
    Built 4L60E with manual lockout
    Atlas 4 speed
    Griffin radiator
    On board air
    Warn 9.5ti on custom bumper
    7.5" RE front and bastard pack rear on custom long arms
    30 gal gas tank
    lockers
    And a bunch of other stuff

  13. #13
    Join Date
    May 2014
    Location
    valdosta ga
    Posts
    9

    Default Re: np242

    are you staying the axle u-joints or what?

  14. #14
    Join Date
    May 2014
    Location
    valdosta ga
    Posts
    9

    Default Re: np242

    my front drive shaft has yellow paint like from a junk yard

  15. #15
    Join Date
    May 2014
    Location
    valdosta ga
    Posts
    9

    Default Re: np242

    if i take the drive shaft out would that help me narrow the problem down?

Page 1 of 2 12 LastLast

Similar Threads

  1. Tom Woods NP242 SYE
    By Mudderoy in forum Modified
    Replies: 28
    Last Post: 03-15-2018, 11:30 PM
  2. Wtb: Np242
    By kr2590 in forum Wanted! (To buy)
    Replies: 0
    Last Post: 09-12-2012, 09:39 PM
  3. rebuilding np242
    By Metlic53 in forum Modified
    Replies: 13
    Last Post: 03-18-2011, 10:52 AM
  4. NP242 Table
    By Mudderoy in forum OEM/Factory
    Replies: 9
    Last Post: 09-06-2010, 10:06 PM
  5. NP242 issue?
    By Mudderoy in forum OEM/Factory
    Replies: 3
    Last Post: 12-17-2009, 09:46 AM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •