Page 1 of 4 123 ... LastLast
Results 1 to 15 of 47
  1. #1
    muddeprived's Avatar
    muddeprived is offline Level: Uber Jeep Cherokee Trailer Queen
    Join Date
    Mar 2009
    Location
    beaver Falls, PA
    Posts
    1,294
    Chats
    0

    Default How to install Detour's Backbone.



    This is a write-up for Detour's Backbone front winch bumper. Enjoy

    First, of all things, you need to order "da bumper". It's real easy. First make sure you have at least 350 ready. Next you

    wanna go to XJ / MJ Backbone Bumper System and check out some of the pictures. Have a nice big bowl in

    front of you to catch the drool. After drying off your mouth, call him up or send him an email saying "i want that damn

    bumper!" and he'll bill you, you pay him, he ships it out, etc etc, you own a jeep, you know the drill VERY WELL.

    A week or two later, a big brown box will appear on your doorstep. Rip that open and you will find this inside:




    inside that envelope is where the nuts and bolts are hiding...



    There were two white papers included and best thing of the entire package:

    A STICKER!




    Now you have everything you need to put this bumper on your.......you do have a cherokee right? I sure hope so. Here's

    what we will be installing it on:



    Before we can install it, we hafta paint it. Detours is smart. They send the winch bumper primed but not painted. Most

    companies use powerdercoating and it ALWAYS get's damaged through shipping. You can't really touch up

    powercoating that well. This bumper comes primed and ready for you to rattle can it or pro-paint it. In my case, i opted

    for the most un-common color used on bumpers: black.



    Let's see how much the two cans costs cuz i can't remember...



    Oh damnit.....(rubbing eyes)



    Ahh there it is. Almost 6. See, not too bad. Cheap paint!

    Now it's time to paint the bumper so it's ready to be bolted on.



    Paint it first so it would have time to dry while you are tearing apart your front end monster-garage style.

    Ok let's climb under the front and check out what we need to remove or snap in half (argh!!!!)..

  2. #2
    muddeprived's Avatar
    muddeprived is offline Level: Uber Jeep Cherokee Trailer Queen
    Join Date
    Mar 2009
    Location
    beaver Falls, PA
    Posts
    1,294
    Chats
    0

    Default



    There are two brackets holding the bumper to the fake frame with three bolts per side. In order to remove those bolts,

    you will need one of these:



    With a 15mm socket....



    Stick that cool little tool on the bolts and turn counterclockwise..



    Remove all six bolts. I was curled up in a little ball expecting the bumper to fall on my nuts but that never occured. I

    realized that there was something still holding the bumper on. Hmm.....AH HA! Found two pesky little bastard screws

    holding the end caps on. they are on in the inside and you can see them by laying down and looking up through the hole

    (remove plastic flare flap up and out of the way)...



    They are way up on the inside of the end caps so you need some reach. Take out the extenze pills and blend them with

    water. Pour it on your neat little tool that you used to remove the six bumper bolts. This will be the result:



    See, longer is better. Now go through your entire socket set, one by one, and try to find the right size socket. Of course

    it's always the last one you pick up and in this case it is size.......



    umm...can't see.....



    ..damn camera.......ahh screw it, simple:



    It's 8mm. No i didn't get 8mm and 9mm mixed up. I lost 9mm when i first bought this 50 set of sockets. Nice job right?

  3. #3
    muddeprived's Avatar
    muddeprived is offline Level: Uber Jeep Cherokee Trailer Queen
    Join Date
    Mar 2009
    Location
    beaver Falls, PA
    Posts
    1,294
    Chats
    0

    Default

    Back on topic. Remove those two screws on both sides and then the bumper will start to release itself. I was lucky once

    again cuz some sort of hose halted the bumper's progress towards earth:



    Someone installed a bomb that apparently did not function correctly and has been collecting dust. There's a hose

    coming out of it and i assume it's a vacuum powered bomb. Since my AC and heater don't work this thing has no

    chance to explode but I'll keep it in there anyways. Pull that hose out of the bomb....CAREFULLY.....

    and ....HOUSTON, WE HAVE TOUCHDOWN!



    Mission accomplished!



    Ok now you have the bumper in YOUR command, let's remove the end caps. They are in the way of measuring if you

    decide to keep your factory bumper.

    There are two bolts per side, on the bottom:



    You will need your trusty tool you've been using and a socket in the size of....




    oh..here we go again...




    10mm. Yeah, the same size holding the rear end caps on, that i snapped in half.

    take that wonderful tool with the socket and remove that bolt...




    (3 minutes later)



    (7 minutes later)



    Hmm it just keeps spinning without coming out. Let's look underneath..



    Ahhh no wonder. No biggie though, nothing my grips can't handle..



    Here's the other bolt near the end..



    Once you get those off, the end cap will pull away from the bumper..


  4. #4
    muddeprived's Avatar
    muddeprived is offline Level: Uber Jeep Cherokee Trailer Queen
    Join Date
    Mar 2009
    Location
    beaver Falls, PA
    Posts
    1,294
    Chats
    0

    Default

    Of course, like the bumper itself, it doesn't come off without a fight. There's another freakin bolt holding it on. What

    the....screw it, just tear it...



    Ok that's off and so is the other side. Let's go check out the bumper and see how it's drying..



    Nice

    Back to the bumper. Mine came with this bling bling low rider flap or whatever it's called. Garbage really. Not need either.

    Let's take that off.



    ..and throw it away...literally.




    Now comes the time where you have to remove the three steering box bolts. I was expecting to breeze through this with

    ease but of course nothing ever goes as planned. I ended up snapping two of the three steering box bolts. They were

    rust-welded to the box/spacer. Since I could not get them out of the box, I had to replace the box with a reman:



    and then order a frame spacer from c-rok:



    I went with c-rock because it's steel. The oem spacer is made out of alum. or magnesium and it corrodes to metal,

    which left me screwed in the first place. The c-rok spacer acts as a brace and replaces the oem spacer. With the c-rok

    spacer and detour's bumper, both sides of my frame are reinforced and i have little to worry about tearing the box off our

    cardboard frames.

    It has been a week and now i'm continuing the install. I installed the steering box and it's ready to go. Let's resume by

    removing the nut clips on the end of the frame, that held the bumper on. You remember the six bolts you removed?

    These are the nuts for them. Pop them off anyway you please..



    Now it's time to slide the detour's bumper onto the frame but I decided to check the bolt holes first. Good thing I did cuz

    look what I found:



    Whoever rebuilt the front end didn't do it perfectly. The bolt holes were blocked 1/2 way by the nutsert for the sway bar

    brackets.

    Both sides too.....



    I did not panic. I have another trusty tool upstairs that can easily take care of this minor setback:



    Yeah baby! POWER TOOLS!.....well sorta....

  5. #5
    muddeprived's Avatar
    muddeprived is offline Level: Uber Jeep Cherokee Trailer Queen
    Join Date
    Mar 2009
    Location
    beaver Falls, PA
    Posts
    1,294
    Chats
    0

    Default

    After a bit of dremeling, the holes were clear for insertion:





    Now let's take the bumper and slide it on the frame, inserting one bolt per side to hold it in place.



    After it's reunited with the jeep, insert two more bolts on the passenger side, and the three steering box bolts on the

    driver's side.





    Let's start off by tightening the bolts closest to you, near the front:

    I chose to use some anti-sieze on the threads. It'll save my arse later on.



    Now we need to pour some more extenze drink on the trusty tool to get it long again and stick a socket on it.



    This is what size you need and i'm not bothering taking another picture of the socket...



    Tighten clockwise..



    After getting those two bolts on both sides, move onto the passenger side two rear bolts. You will need the same tool

    again, and i found out it's called a socket wrench, or rachet. I still call it my trusty tool.



    and of course, the size socket you need...


  6. #6
    muddeprived's Avatar
    muddeprived is offline Level: Uber Jeep Cherokee Trailer Queen
    Join Date
    Mar 2009
    Location
    beaver Falls, PA
    Posts
    1,294
    Chats
    0

    Default

    This bolt has those tricky nuts on the other side that fooled us earlier. We will need the same size open end wrench to

    overcome troublemaker..



    Tighten them up and now it's the steering box bolts. You will need this size:



    I had to install my c-roke brace and steering box, and you will be doing pretty much the same thing with your box and

    spacer..



    Again, tighten the steering box bolts clockwise and TIGHT. I dunno the factory torque specs on these bolts, nor do I

    care. I just put them super freakin tight with some blue locktight. They aren't going anywhere.

    Now we are pretty much done but before we sit back and check out the new winch bumper, let's see what the scorecard

    is showing:



    Yup, the bumper won 6-0. That's how many times i struck my head on the newly extended winch bumper that just

    happens to extend right over your head (if your jeep is high enough). It hurt.....bad.

    After retreiving an ice pack from the freezer, we can now stand back and check out our new accessory added to our

    jeep:

    A paper towel holder:



    the only one on the market today.


    This project is not completed yet. You are only half done. Now you have to decide whether you wanna re-use your factory bumper or modify an aftermarket bumper to fit on it. I chose to go with my factory bumper cuz i'm cheap.

    I was gonna give you a write-up on how to cut it but my gf was a little ticked seeing her camera covered in grease and dirt from my hands during the installation of the paper towel holder. "It happens" i told her but that ended up with no camera to use. I did manage to sneak a few completed shots. Don't tell her please...shh!





    You can see the big gap below the bumper from when we threw away that center piece. I am in the process of cutting the end caps to shorter so they line up with that center section. It'll give me more ground clearance too.



    How far it sticks out and what my head battled against...




    Well, that's that. I hope this helps enough to prevent you guys from installing the bumper upside down or something.

  7. #7
    Join Date
    Mar 2009
    Location
    Katy, Texas
    Posts
    27,068
    Chats
    30765

    Default

    Hilarious! Taking all those pictures makes the work last twice as long, so many thanks for doing it.

  8. #8
    muddeprived's Avatar
    muddeprived is offline Level: Uber Jeep Cherokee Trailer Queen
    Join Date
    Mar 2009
    Location
    beaver Falls, PA
    Posts
    1,294
    Chats
    0

    Default

    Quote Originally Posted by Mudderoy View Post
    Hilarious! Taking all those pictures makes the work last twice as long, so many thanks for doing it.
    Tell me about it. Thanks

  9. #9
    Join Date
    Mar 2009
    Location
    Indianapolis, Indiana
    Posts
    689
    Chats
    0

    Default

    Deprived does the BEST write ups! Comical, but complete. That is what I missed on CT while you were 'gone". Looks nice.

    BTW, the WTF you ran into.....my 2000 was the same. Apparently Jeep put some sort of "plate" to reinforce the swaybar mounts inside the frame. I guess they didn't care if it covered up half the hole.

    BTW2...where's the winch?
    2000 Cherokee Sport 4.0L/AW4/NP242....

    " the ONLY reason you're still conscious is I DON'T want to have to carry you!"
    ......Jack Bauer

  10. #10
    Join Date
    Mar 2009
    Location
    South TEXAS
    Posts
    7,244
    Chats
    3

    Default

    One of the best writeups of all time. Informative and hilarious at the same time. Going out for some extenze right now. Can you do a writeup on that mixing procedure too!!

  11. #11
    muddeprived's Avatar
    muddeprived is offline Level: Uber Jeep Cherokee Trailer Queen
    Join Date
    Mar 2009
    Location
    beaver Falls, PA
    Posts
    1,294
    Chats
    0

    Default

    Quote Originally Posted by firehawk View Post
    Deprived does the BEST write ups! Comical, but complete. That is what I missed on CT while you were 'gone". Looks nice.

    BTW, the WTF you ran into.....my 2000 was the same. Apparently Jeep put some sort of "plate" to reinforce the swaybar mounts inside the frame. I guess they didn't care if it covered up half the hole.

    BTW2...where's the winch?
    Oh I guess it came from the factory that way. weird.

    Winch? What for? It holds paper towels.


    There's SUPPOSED to be a winch on there but the damn gear box failed on me so i had to spend elsewhere. I'll get one on there soon.

  12. #12
    muddeprived's Avatar
    muddeprived is offline Level: Uber Jeep Cherokee Trailer Queen
    Join Date
    Mar 2009
    Location
    beaver Falls, PA
    Posts
    1,294
    Chats
    0

    Default

    Quote Originally Posted by BlueXJ View Post
    One of the best writeups of all time. Informative and hilarious at the same time. Going out for some extenze right now. Can you do a writeup on that mixing procedure too!!
    Just drop 3 pills in 1 oz of water and blend. Drink half of it and leave the other half for the tool. Careful with the 'reaction'.

  13. #13
    Join Date
    Mar 2009
    Location
    Katy, Texas
    Posts
    27,068
    Chats
    30765

    Default

    Quote Originally Posted by firehawk View Post
    Deprived does the BEST write ups! Comical, but complete. That is what I missed on CT while you were 'gone". Looks nice.

    BTW, the WTF you ran into.....my 2000 was the same. Apparently Jeep put some sort of "plate" to reinforce the swaybar mounts inside the frame. I guess they didn't care if it covered up half the hole.

    BTW2...where's the winch?
    Same here. I had to drill it out asswell.

  14. #14
    Join Date
    Mar 2009
    Location
    Indianapolis, Indiana
    Posts
    689
    Chats
    0

    Default

    Quote Originally Posted by muddeprived View Post
    Just drop 3 pills in 1 oz of water and blend. Drink half of it and leave the other half for the tool. Careful with the 'reaction'.
    The half you drink... is that to help raise up the parts you're putting on the Jeep? You do know if "it" lasts more than four hours to seek medical attention don't you? SWING!!!
    2000 Cherokee Sport 4.0L/AW4/NP242....

    " the ONLY reason you're still conscious is I DON'T want to have to carry you!"
    ......Jack Bauer

  15. #15
    Join Date
    Mar 2009
    Location
    Katy, Texas
    Posts
    27,068
    Chats
    30765

    Default

    Quote Originally Posted by BlueXJ View Post
    One of the best writeups of all time. Informative and hilarious at the same time. Going out for some extenze right now. Can you do a writeup on that mixing procedure too!!
    Only if there is a super model involved.


    ahhh female super model.

Page 1 of 4 123 ... LastLast

Similar Threads

  1. How to install Detour's Backbone.
    By muddeprived in forum Technical "HOW TO" Articles
    Replies: 45
    Last Post: 11-05-2009, 10:33 AM
  2. Detours Backbone System install
    By firehawk in forum Technical "HOW TO" Articles
    Replies: 69
    Last Post: 06-05-2009, 04:27 PM
  3. I love my new Detour's product.
    By muddeprived in forum Modified
    Replies: 18
    Last Post: 05-03-2009, 11:18 PM
  4. Detours Backbone System install
    By firehawk in forum Technical "HOW TO" Articles
    Replies: 6
    Last Post: 03-24-2009, 08:34 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •