Results 1 to 5 of 5

Thread: Ball joints and/or tie rod ends

  1. #1
    Join Date
    Jul 2013
    Location
    ohio
    Posts
    51

    Default Ball joints and/or tie rod ends

    not sure if this is the right section but o well..so recently I've been hearing some popping from my front end (seems to be passenger side) when I back up and sometime when I turn. I've also heard some creaking/cracking noises from the front end while turning or sometimes driving straight on a rough road....wondering if you guys have any tips on this..thinking about ordering ball joints and TREs soon. I've also heard of people replacing there control arm bushings??..not sure why that would make a difference but worth asking. thanks.

  2. #2
    Join Date
    Sep 2009
    Location
    Chico, CA
    Posts
    29,847

    Default Re: ball joints and/or tie rod ends

    It all works together. But before you spend money, I suggest you get under there and have somebody steer it lock to lock. That can help pinpoint it. Other culprits, track bar bushing will give a popping sound sometimes. Mine did. Also passenger side coil spring rubbing on the sway bar.
    230 hp 4.3L Chevy
    Built 4L60E with manual lockout
    Atlas 4 speed
    Griffin radiator
    On board air
    Warn 9.5ti on custom bumper
    7.5" RE front and bastard pack rear on custom long arms
    30 gal gas tank
    lockers
    And a bunch of other stuff

  3. #3
    Join Date
    Jul 2013
    Location
    ohio
    Posts
    51

    Default Re: ball joints and/or tie rod ends

    well I just ordered a new adjustable track bar so hopefully that helps and I know it is not the sway bar

  4. #4
    Join Date
    Jun 2012
    Location
    manteca, ca
    Posts
    446

    Default Re: ball joints and/or tie rod ends

    My control arm bushings need replacement, they pop and crack...
    Nate<><

  5. #5
    Join Date
    Jul 2013
    Location
    ohio
    Posts
    51

    Default Re: ball joints and/or tie rod ends

    ha well then....maybe I should check my upper control arms too then because I just replaced the bottom ones with the lift. buuuuuut im looking to get long arms too so if that's the case I guess ill just get some long arms

Similar Threads

  1. Ball joints?????
    By alwaysxj in forum OEM/Factory
    Replies: 22
    Last Post: 04-08-2011, 12:47 PM
  2. Removing and Replacing Dana 30 Ball Joints
    By Mudderoy in forum Technical "HOW TO" Articles
    Replies: 8
    Last Post: 04-03-2011, 08:31 PM
  3. I am changing my ball joints next week...
    By phillyxj570 in forum OEM/Factory
    Replies: 10
    Last Post: 02-24-2011, 05:27 PM
  4. u-joints
    By gary63 in forum General Talk
    Replies: 0
    Last Post: 09-25-2010, 09:36 AM
  5. Ball Joint question
    By theguy in forum Technical "HOW TO" Articles
    Replies: 10
    Last Post: 11-25-2009, 09:35 PM

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •