Need to straighten the steering wheel

[01xjcny]

well i will take some pics on sunday and measure, i thought the pitman arm was keyed for one spot but maybe not the case

[4.3LXJ]

You can clock it 90° to either side

[01xjcny]

well i have equal turning left to right, but i it could be wrong anything is possible i know it is hard to diag over the computer so if i get measurements and pics anything else i should do to help the process

[01xjcny]

well i think i got it figured out i put it on the alignment rack and took a laser level from the hub and looked where it was on the back axle. Looked to be off center and my thrust angle was off so i adjusted the trac bar till the thrust angle was perfect and the laser level was equal from side to side then it gave room to adjust the steer ahead

[4.3LXJ]

G;ad you got it figured out

[01xjcny]

it was about 2 inches off

[4.3LXJ]

That is a lot

[01xjcny]

yea maybe not that much but i moved the track bar out at least a inch in threads maybe little more

[4.3LXJ]

That is still a lot

[01xjcny]

thats what i thought so hopefully no other problems if i am not suppose to move the trac bar that much. it took the steering wheel from 10 oclock to 3 o clock. still have a pull to the left but thinking its the tires so maybe i wll rotate them to see if it goes away