Search:

I don't have a distributor. The crank sensor was changed a couple weeks ago. Cam position sensor was changed about a year ago. Maybe I need to re-index the cam position sensor? Also, would that cause...

http://youtu.be/HHfd_AaTgX8

Still trying to fix it. Went through and cleaned and upgraded all my electrical grounds.
Finally threw a code that stayed long enough I could read it. P1648. Been trying to troubleshoot it by...

Just replaced it

Changed my crank position sensor and thought it was fixed but it just did it again today.
Thought my fuel pump might be going out so I did a pressure test and I'm running at about 50psi at idle....

yeah original motor and exhaust. where are the other two located then?

ive only found two O2 sensors on my xj. upstream(right after the manifold before the cat) and down stream (right after the cat). apparently some 2000's had 2 and some had 4 (california emmisions)

things were going great then the same symptoms but worse started occurring. id be driving and out of the blue it would completely cut off while driving. thought it might be my alternator so i...

They didn't go to zero but tach went from 2k down to like 700 and speedo went from 40 to 10. Changed my spark plugs and that might have fixed it. No issues since. Probably misfiring considering my...

While driving yesterday. Out of the blue, I would be going 35-50mph and when I would accelerate my rpms would tank, speedo would tank and my jeep would shudder really hard till I let off the gas and...

Hey ya'll. just got a set of 33x12.5 tires. I was running 31x10.5 with my 3.5" lift no problem. Cut front fenders. About to cut the back. I can't turn fully without rubbing in the front and I need to...

Awesome thanks for the diagram. Finally rebuilt the original multi function switch. Gonna swap it back in today and see how it goes!

Sorry, should've clarified- led's in the front side markers. Haven't had fast flash issues they've been in for a month or so.

Bulbs are brand new led's. It doesn't light up on the dash or click or anything so I'm thinking its a bad ground, switch or relay

Hey ya'll. so my totally financially stable, flawless, fuel efficient xj decided to not let the turn signals work. I went to the JY and grabbed the steering column switch and the relay under the...

If you use dielectric grease, only put a small amount on the male threads to keep water out of the connection. Do not just slather it on because the it will short out. If you look at the connection...

Thanks for that clarification! Definitely don't want to lead others in the wrong direction! I also put a 10ga wire ground between the mount bolt and the body just incase the hatch wasn't grounded...

and of course, my "competition use only" 2-pill linear for when you gotta talk a litte farther or someone needs to be stepped on:D:

not sure how to be able to get more than one picture per post but heres the cb mounted

hey ya'll, mew here. was in the same dilemma with deciding where to mount anything ut finally got everything sorted out. heres some pictures. the antenna mount, while yes i had to drill some holes...