Search:

It turns out a pin bent over on the socket/plug, I finally found it and was able to straighten it and all is good again! She is back on the road after a year + of storage. Out of my 3 XJ's and a TJ...

Thanks, I pulled it off and re-installed it twice, the plug has a detent click when all the way in. I guess it could be dirty but it worked well before removal. I guess I will take the dash all apart...

Hello all, I had to remove my instrument cluster when replacing the headlight switch on my 1992 XJ. I took it back out again and refastened the plugs but still nada... Any clue on where to start the...

Thanks!

My main concerns are is the ATK really a stroker and rebuilt or just another steam clean and paint "rebuilt". If I am going to drop 3K and lots of time I want a ten year motor or more... When you...

I need 4 all manual doors w/working windows, would love white if available. No rust, will trade my all electric some windows actually still work. LOL It would be great if in Texas also!

Has anyone on here done a Pre 1999 ATK Stroker in their XJ? I have one of my favorite XJ's (1992) down and out now (bad knock) and want to get her back on the road. She has the frame stiffeners and...

I will look into that I need to work on my safety switch so I can just plan a week end to do both.

SO how many miles and how much are you asking for it. Also what year is it from?

I am looking for a good running engine for my 1992 XJ. I need it to be an early engine so I wont run into all the problems with changing the intake. Let me know what you have available. This is my DD...

I am looking for a good running engine for my 1992 XJ. I need it to be an early engine so I wont run into all the problems with changing the intake. Let me know what you have available. This is my...

So as the title says rear leaf mount failed. The captive nut broke loose from inside the frame, I had been able to reach in with a nut in an open end and get it to hold but a year later it has failed...

Yea I was looking at those and thinking of welding them in, I have HD OME rear springs with a little too much lift already. So I guess I will look in the fab forum and see what I can find on this.
...

OK so I had that correct the track bar and drag link need to be parallel and if you look in the attached pic, they are very close. I am going to look at the disco's next and see if one of them could...

Well this would not be a big deal but it is the one for the upper shackle mount for the rear of the leaf spring. When I installed the new springs the nut broke free and I managed to get a wrench in...

Nah he is too skinny to hold up under pressure! He would crumple like paper in a roll over LOL!

Just Kidding Nick if you are reading this! LOL

EZ

Is there anything left of this part out? I would like the following, front drive shaft, door switches dash switches, AC controller, Drivers front fender, Lighter plug, front grill and fiberglass...

Thanks for posting that pic of the fitment of the Safari with the Bushwhackers, I have the Safari and wanted to see it before I ordered the flares! My fenders are cut pretty high so the next question...

Hey thanks for your reply, it is only showing up when in an emergency braking situation when all that spring compression is happening. That is why it is a little like bump steer. when applying the...

Mine was purchased a year or so ago from Dirtbound and the sensor was set up to install in the hose. Was your sensor not from Dirtbound?

Hello All,
It has been quite a while since I posted here but my son and I have an issue with his XJ. Here is some back ground spec's He has a RE 61/2" lift with OME shocks. (I know too much lift...

Jake,
Here is a review from me earlier this year on the fan system. The fans are
~5 months old now and in Houston's mild winters I have to turn the fans off due to them working too well. I do...

please close

I have done many lifts on XJ's and TJ's, but this is a first, we put a 2" budget boost in a friend's XJ last week end Blocks in rear and a set of my old used RE 3" springs in front. All went well...

I bought the IPF housings and bulbs and have been very happy with the purchase. They are very bright and the light color is great, to avoid buying the very high priced harness, I bought High heat...