Search:

Type: Posts; User: 4.3LXJ; Keyword(s):

Search: Search took 0.03 seconds.

  1. Re: Strange noise/bounce after SYE and control arms?

    Never hurts to have spare bolts
  2. Re: Strange noise/bounce after SYE and control arms?

    Yes, use the 5/16" center pin. Also get one that is plenty long, but still has threads at the pack thickness. It will be much easier to line up everything and get it together. And use C clamps to...
  3. Re: Strange noise/bounce after SYE and control arms?

    Stock size is 5/16" shaft, with a 1/2" head. If you already have a different size installed, then someone has already been there ahead of you. If you bought that size, I recommend exchanging it and...
  4. Re: Strange noise/bounce after SYE and control arms?

    The S10 spring uses a 3/8 center pin and the X?J uses a 5/16. You can use the smaller size, since the important part is the place the head fits on the axle. It is an alignment device only. I have...
  5. Re: Strange noise/bounce after SYE and control arms?

    If that drive shaft is loose, then shimming will not get rid of the vibes. It only works with a good driveshaft. If you are going to take the CV apart to fix the ball and stud, might as well use...
  6. Re: Strange noise/bounce after SYE and control arms?

    Yes, needs some TLC
  7. Re: Strange noise/bounce after SYE and control arms?

    here is a tread on setting driveline pinion angles. Hope this helps

    http://www.xjtalk.com/showthread.php?t=7299
Results 1 to 7 of 7