PDA

View Full Version : Dec 10-11 meet and wheel



RAMMAN84
11-11-2011, 12:38 PM
Hey y'all im trying to get a group together for a wheeling trip out to creekside edge in splendora that weekend just trying to meet some other wheelers that are close to me plus it would be this trucks first adventure.
Anyone interested

Firemanray
11-11-2011, 12:55 PM
There's a few of the Houston area going to Shilo Ridge on Dec. 3 if your interested. The only thing with this outing is, we're going to wheel not sit around and talk shop. I might be able to hit Creekside on Dec 10, since it is December I'll have to check with my social director (wife) and see if we have anything that day.

RAMMAN84
11-11-2011, 01:11 PM
I work that weekend is the issue plus I would like something close for the shakedown run

Firemanray
11-11-2011, 01:14 PM
I work that weekend is the issue plus I would like something close for the shakedown run

I'll check on the 10th and post it .

bigjim350
11-12-2011, 01:37 AM
I will try to take off that weekend. Will post for sure as it gets closer. Will also let you know if I go out there before then. You ever available to go wheeling during the week?

RAMMAN84
11-12-2011, 07:17 AM
Cool thanks guys, no unfortunately my work schedule is rediculus 6am-7pm m-f 8-6 two sat on 1 sat off

Firemanray
11-12-2011, 08:19 AM
Cool thanks guys, no unfortunately my work schedule is rediculus 6am-7pm m-f 8-6 two sat on 1 sat off

What the heck do you do that eats up those kind of hours?

RAMMAN84
11-12-2011, 08:37 AM
Im a technician I just stay busy 90% of the time. If I don't they will bring someone else in to help with my job and cut my intake in half

prcjeep
11-21-2011, 12:21 PM
im interested in wheelin that weekend... I need to repair/re-install my front ds and i should be good to go... I havent wheeled since.......July? ya, if i cant remember, it's been too long

Metlic53
11-29-2011, 08:51 AM
i'll try and cruise out there with some buddies of mine on the 10th if i get my control arm axle mount put back in shape, so you may see me there. I haven't had this Jeep stuck yet, i try but i go through everything there! :D

RAMMAN84
11-29-2011, 09:56 AM
Assuming the best but I may end up working the 10nth but the 11th is still good so far

Metlic53
11-29-2011, 11:03 AM
Assuming the best but I may end up working the 10nth but the 11th is still good so far

oh alright, i'll prob be out there only on the 10th cuz ive got church and work on sundays. but ya never know.

bigjim350
11-29-2011, 11:33 AM
i'll try and cruise out there with some buddies of mine on the 10th if i get my control arm axle mount put back in shape, so you may see me there. I haven't had this Jeep stuck yet, i try but i go through everything there! :D

Uhh which jeep you talking about? Cause I know of rigs with 44's that cant make it through everything out there......

Metlic53
12-01-2011, 01:57 PM
Uhh which jeep you talking about? Cause I know of rigs with 44's that cant make it through everything out there......

my purple one, the 90. ive taken it out there twice and been down every trail...at least i think all the trails. i had some guys bet me to go through this one hole cuz their wrangler on 38's didnt make it and i went through it. now theres a few holes out there that i've seen and i'm not going to drive in that deep of water, i had the water in the jeep about 4 inches or so high inside and that was too deep, top of the tire is about as deep as im going to go and i'll go through it fast so water doesnt get in anything. im not into that deep water stuff where i drown the motor and my axles fill up with water. i was surprised at how well i did with open diffs out there, the swampers help alot, on just some say bfg muds i would have been stuck alot more. i saw a few holes that i couldn't go through just because of how deep it was. some holes are just too deep out there.