Write up request Auto dim mirror

[Indiana Jeep]

A while back I put in an overhead console from a 98 Grand Cherokee. It also had the auto dimming rearview mirror. I have been able to get it installed and working properly with the exception of the mirror. (I didn't have the temp sensor to hook up either but not worried about that at the moment.) I was hoping someone would be able to help with the wiring so I could get it working. On the back of the mirror (I believe the serial # is55155314 and the model might be GNTX-125) is a 7 slot plug in but only 5 slots are used.

Mirror
http://i935.photobucket.com/albums/ad192/99JeepXJ/th_8cb415be.jpg (http://s935.photobucket.com/albums/ad192/99JeepXJ/?action=view&current=8cb415be.jpg)

Plug
http://i935.photobucket.com/albums/ad192/99JeepXJ/th_de47e4aa.jpg (http://s935.photobucket.com/albums/ad192/99JeepXJ/?action=view&current=de47e4aa.jpg)

http://i935.photobucket.com/albums/ad192/99JeepXJ/th_78edca44.jpg (http://s935.photobucket.com/albums/ad192/99JeepXJ/?action=view&current=78edca44.jpg)

Looking at the back of the mirror the wires going from left to right are:
1 Black/ blue
2 Black
3 Black/ red
4 Black/ white
5 Black/ yellow
6 empty
7 empty

The wires from the overhead console have all got matching colored wires on the XJ. However I have not been able to figure out a match for the mirror. If anyone has put one of these in or knows how to hook it up it would definitely be appreciated!