high cut front/rear wheelwells

[OMOC]

has any one cut out or opened up front and rear wells to clear 33" or bigger? i will post those pic's today or tomorrow:smiley-scared002:

[Mudderoy]

Do you mean without a lift? I was able to do 32's with 4.5" lift and no trimming.

[DETOURS]

has any one cut out or opened up front and rear wells to clear 33" or bigger? i will post those pic's today or tomorrow:smiley-scared002:

It's done everyday, watch the rears....cut too far and you'll be welding it back together.

[xjjeepthing]

I trimmed the fronts and the rears. Cut and fold the rears and cut the fronts
http://i149.photobucket.com/albums/s44/xjjeepthing/My%20jeep/100_3691.jpg
http://www.rocklizardfabrications.com/fender_trimming.htm

[jugbutt]

I trimmed the fronts and the rears. Cut and fold the rears and cut the fronts
http://i149.photobucket.com/albums/s44/xjjeepthing/My%20jeep/100_3691.jpg
http://www.rocklizardfabrications.com/fender_trimming.htm

How did you get the rear wheel wells looking so good?

[xjjeepthing]

This is what I went by. except no whackers
http://www.jeepin.com/features/bushwacker/index.asp
http://www.jeepin.com/features/bushwacker/page2.asp

Just take your time with the cuts and it will look nice

[Xtreme XJ]

Just a note on the rears... I got a little too eager folding mine... take your time and support the sheetmetal from behind the section at the top of the fenderwell is wavy... not horrible, but not super clean either.

Curt

[Voldemort]

Just a note on the rears... I got a little too eager folding mine... take your time and support the sheetmetal from behind the section at the top of the fenderwell is wavy... not horrible, but not super clean either.

Curt

I did that same thing but I also made my first couple cuts a little to high also.

[offroadohio]

Im running 33's and a cut and fold aswell..

http://i239.photobucket.com/albums/ff62/offroadohio/For%20Sale/P1000680.jpg