PDA

View Full Version : Mj heavy duty tie rod system



RTPG
11-19-2010, 02:17 AM
http://store.4wheelingplus.com/images/currie-ce-9701-hd-steering.jpg

Description:
The Currie Currectlync® heavy duty tie rod and drag link system for TJ, LJ, XJ, and MJ vehicles features, a 1.25" diameter forged alloy drag link, and 1.25" solid alloy steel tie rod bar that is bored and threaded on the ends. All 7/8" thread tie rod ends with boots are included as well as the Currie heavy duty steering stabilizer bracket. This unit is a direct replacement for the stock parts. No modifications or machining to any part of the vehicle is necessary (on vehicles with no lift, 2 of the tie rod ends must be trimmed to achieve proper adjustment). This unit is rated at 200% stronger than the stock components.

Fits:
Jeep TJ, LJ, XJ, MJ

Specs:
1-1/4 chromemoly Drag Link and Tie rod Tube
Oversized 1-1/8 threaded Drag Link Adjuster and Giant Clamps
7/8 threaded Tie Rod Ends
Greasable Zerk fittings
Heavy duty steering stabilizer bracket kit
Easy bolt-on installation
Fits Jeep with up to 4 inches of lift

You won't find a tougher steering setup for your Jeep without having to seriously modify your stock steering knuckles

All parts are included and you won't have to buy "additional items" afterwards to make this work

Note:
Will not work with right hand drive vehicles

http://store.4wheelingplus.com/proddetail.asp?prod=CE-9701

PM me for the XJTalk.com discount. :thumbsup: