What did you do to your XJ today?

[firehawk]

Seems there is a thread like this everywhere else and I didn't see one on here so I'll start. BTW, moderator if this isn't the right place for this...sorry.

I welded on my JKS LCA skids today.

[TeXJ]

Pics or it didint happen :D

[firehawk]

Pics or it didint happen :D

Oh it happened.:D I've had them for over a month now, just been putting it off. The weather was nice today, and I decided to finally get it done. I didn't take any pic's though.

[Mudderoy]

Sadly all I did was drive it to work.

I bought two new u-joints for the front driveshaft last Friday.
I have a CPS, an ignition coil, a front seal for the NP242 all waiting for my lazy a$$ to install.

You wait though. As soon as that winch bumper comes in I'll have it painted and installed in less than 48 hours. :mad:

[Melissa]

I replaced a burnt out headlight and replaced a vacuum hose.

[cheyennek5]

walked outside and looked at it :(

[Mudderoy]

Drove it home from work. Maybe I'll have more to report later today!

[muddeprived]

Stunk up the inside really bad. I learned not to hold "it" for too long. It eventually converts to a gas and would challenge any skunk out there.

[cheyennek5]

i walked out to look for my cat and ended up looking at how hard its gonna be to swap everything over to a body that doesnt have crappy looking unibody welds from a previous front end crash :(

[xjjeepthing]

PB Blasted front end parts. Gonna do some front end work tommorrow :thumbsup::smiley-dance011:

[firehawk]

Finished up mounting everything back up on the front end. Mounted the KC driving lights, and the front skid plate back on.

[cheyennek5]

put a new starter on after old one died

[Melissa]

I went for a drive, 120 miles round trip

[JeepXJ.com]

Looked at it, thought about washing it...and then went back inside. LOL. exciting. Maybe tomarrow.

[Mudderoy]

I finally changed the FREAKING oil!

[jonlee79]

http://www.xjtalk.com/picture.php?albumid=412&pictureid=3232 got speaker box done head liner already done now got to do the visors

[Mudderoy]

http://www.xjtalk.com/picture.php?albumid=412&pictureid=3232 got speaker box done head liner already done now got to do the visors

I'd be curious to know how hard it is to do the visors. Pictures are king! :popcorn:

[jonlee79]

http://www.xjtalk.com/picture.php?albumid=412&pictureid=3232http://www.xjtalk.com/picture.php?albumid=412&pictureid=3227
http://www.xjtalk.com/picture.php?albumid=412&pictureid=3228http://www.xjtalk.com/picture.php?albumid=412&pictureid=3238
http://www.xjtalk.com/picture.php?albumid=412&pictureid=3237

[Shoesxj]

This is what I did to my xj. When I bent my tie rod link. Out wheeling at a event. So I could keep on wheeling.
http://img.tapatalk.com/a6934810-2bf8-6397.jpg
Works good. And I'm still have it on my xj. ( if it ant broke why fix it) lol