CrawlQueen's XJ

[W.O.R.P.Offroad]

Here are some pics of CrawlQueen's new xj. Its a 91 2dr 4.0l, ax15, 231, 30, 35, 3.07, man everything. It will be gettin 3" lift and 31-33's her soon. As well as bumpers, tire carrier, skids, and more.

http://i18.photobucket.com/albums/b105/worpedteg/Lori%20Jeep/DSCF0463.jpg

http://i18.photobucket.com/albums/b105/worpedteg/Lori%20Jeep/DSCF0464.jpg

http://i18.photobucket.com/albums/b105/worpedteg/Lori%20Jeep/DSCF0465.jpg

http://i18.photobucket.com/albums/b105/worpedteg/Lori%20Jeep/DSCF0466.jpg

[alwaysxj]

looks good. seems like a lot of two doors are pooping up lately and it kind of makes me want to find one to build. so what are the planes?

[W.O.R.P.Offroad]

there is one in va make offer or trade for bumper or roof rack. i would love to have it. i need a few pieces

[W.O.R.P.Offroad]

just a nice dd thats capable. until we find her a tj or yj as a dd then it will get caged and everything. do a 8.8 swap lockers front and rear removable doors all the typical stuff plus some more.

[rguignard]

justin i have a drivers ff if you want it ?

[BlueXJ]

Great lookin' rig, that will be even better with the lift.

[W.O.R.P.Offroad]

in stalled a midland 1001z radio yesterday and this weekend will be installin a francis hot rod antenna and doin removable doors.

[W.O.R.P.Offroad]

havent picked up the other antenna yet but went ahead and tuned this one. removed the headliner got the old fabric off of it and clean up the backing. tomorrow will be gettin more fabric to put on it.

also got a set of stock wheels to replace the explorer ones they dont stay tight. also picked up a set of jk shocks. supposed to be good for 3 - 4" lift. will have the rear springs next fri and then just have to get my 6" front to get her 3" off the front of mine.

[Mudderoy]

havent picked up the other antenna yet but went ahead and tuned this one. removed the headliner got the old fabric off of it and clean up the backing. tomorrow will be gettin more fabric to put on it.

also got a set of stock wheels to replace the explorer ones they dont stay tight. also picked up a set of jk shocks. supposed to be good for 3 - 4" lift. will have the rear springs next fri and then just have to get my 6" front to get her 3" off the front of mine.

That seems strange, why don't the Exploder wheels stay tight?

[4.3LXJ]

That seems strange, why don't the Exploder wheels stay tight?

Is the center hole the right size?

[W.O.R.P.Offroad]

someone has takin and ground on the center holes to make them fit and i dont think the got it done right. so the done stay. i got some stock xj wheels and tires till i can find some nice A/T's to go on it around a 31-33. also thinkin bout steel late model TJ wheels painted black.

[W.O.R.P.Offroad]

recovered the head liner. waitin on the glue to completely dry before i handle it to much. and tryin to get the glue off my fingers

[W.O.R.P.Offroad]

here are some pics of redoin the headliner i didnt take any pics of it with it falling everyone knows what that looks like.

they are in order of start to finish.

still has the foam on it no fabric.
http://i18.photobucket.com/albums/b105/worpedteg/Lori%20Jeep/DSCF0515.jpg

after the foam is goin just the backing.
http://i18.photobucket.com/albums/b105/worpedteg/Lori%20Jeep/DSCF0519.jpg
http://i18.photobucket.com/albums/b105/worpedteg/Lori%20Jeep/DSCF0516.jpg

here is the head liner after the new fabric is applied.
http://i18.photobucket.com/albums/b105/worpedteg/Lori%20Jeep/DSCF0521.jpg
http://i18.photobucket.com/albums/b105/worpedteg/Lori%20Jeep/DSCF0522.jpg

[W.O.R.P.Offroad]

the new wheels and tires.

http://i18.photobucket.com/albums/b105/worpedteg/Lori%20Jeep/DSCF0525.jpg

[rguignard]

looks good justin does it have sagging rear springs ?

[W.O.R.P.Offroad]

im not really sure its sittin on a slight hill

but as soon as i get my 6" front springs then it will be gettin a lift anyways.

[Melissa]

Those wheels look much better!!

[W.O.R.P.Offroad]

i agree i like them alot better

[W.O.R.P.Offroad]

here are some pics of the head liner installed:

http://i18.photobucket.com/albums/b105/worpedteg/Lori%20Jeep/DSCF0542.jpg

http://i18.photobucket.com/albums/b105/worpedteg/Lori%20Jeep/DSCF0543.jpg

a better pic of the wheels:

http://i18.photobucket.com/albums/b105/worpedteg/Lori%20Jeep/DSCF0544.jpg

here is the valve cover after being cleaned up and a new valve cover installed:

http://i18.photobucket.com/albums/b105/worpedteg/Lori%20Jeep/DSCF0545.jpg


i played with the settings on the camera the other day and now it takes alot better pics. now just got to keep the wife from changein them.

[W.O.R.P.Offroad]

nothin really to update yet. may have a lead on a 44/9" combo for my rig if so she ill be gettin a 8.8 and a non disco 30 both with 410. and in a few weeks will have aw4 for it.

[W.O.R.P.Offroad]

it will be gettin a major face lift this weekend not really goin to say what alll is happening yet but will post pics afterwards.

[W.O.R.P.Offroad]

here are a pic of the wheels and tires that shes gettin tomorrow.

33x12.5x15 Maxxis Bighorns with ION Alloy Wheels

http://i18.photobucket.com/albums/b105/worpedteg/Lori%20Jeep/loriwheels2.jpg

[W.O.R.P.Offroad]

i will try to get pics up tomorrow. it now has 3" lift, lca's, 33" maxxis bighorns, rear bumper with swing away tire carrier, fenders and 1/4's cut, tj fender flairs, im sure theres more cant think of it. shes not gettin my 8.8 i traded it for her a 8.25 the 29 spline and lsd and i also got $125 to boot. need to either do a tc drop or a longer yoke. i was givin a longer yoke for the drive shaft. it has blocks on the rear temp and goin to do a bastard pack when the donors are picked up.

[cantab27]

yep with the pics justin

[W.O.R.P.Offroad]

http://i18.photobucket.com/albums/b105/worpedteg/Lori%20Jeep/IMAGE_020.jpg

http://i18.photobucket.com/albums/b105/worpedteg/Lori%20Jeep/IMAGE_024.jpg

http://i18.photobucket.com/albums/b105/worpedteg/Lori%20Jeep/IMAGE_023.jpg

http://i18.photobucket.com/albums/b105/worpedteg/Lori%20Jeep/IMAGE_022.jpg

http://i18.photobucket.com/albums/b105/worpedteg/Lori%20Jeep/IMAGE_021.jpg

yes i know the back is saggin hopefully ill have that fixed in a week or so.

rene has been askin for pics of my build i have goin on. here are a few shots. the front springs are gettin changed out and its gettin 36" tires back on it. these are rollers to get it built. i have to finish my radius arms on mine. its in the process of gettin hp44/9" combo from a 79 bronco in it. has 4.56 gears detroit rear and detroit true trac front, randys ring and pinion nodular 3rd member in the 9", yukon pinion bearing support, 31 spline front and rear, big bearing rear, warn lock outs on the front, right now im sittin at 81" wide with the 31x11.5x15. i will be changin to the 36x12.5x16 on 10" wheels.

http://i18.photobucket.com/albums/b105/worpedteg/My%20jeep%20build/IMAGE_027.jpg

http://i18.photobucket.com/albums/b105/worpedteg/My%20jeep%20build/IMAGE_026.jpg

http://i18.photobucket.com/albums/b105/worpedteg/My%20jeep%20build/IMAGE_025.jpg

[W.O.R.P.Offroad]

idk why the pics are still showin show big i have edited them and redone the photobook thing.

[alwaysxj]

looks pretty good....

[Voldemort]

rene has been askin for pics of my build i have goin on. here are a few shots. the front springs are gettin changed out and its gettin 36" tires back on it. these are rollers to get it built. i have to finish my radius arms on mine. its in the process of gettin hp44/9" combo from a 79 bronco in it. has 4.56 gears detroit rear and detroit true trac front, randys ring and pinion nodular 3rd member in the 9", yukon pinion bearing support, 31 spline front and rear, big bearing rear, warn lock outs on the front, right now im sittin at 81" wide with the 31x11.5x15. i will be changin to the 36x12.5x16 on 10" wheels.

http://i18.photobucket.com/albums/b105/worpedteg/My%20jeep%20build/IMAGE_027.jpg

http://i18.photobucket.com/albums/b105/worpedteg/My%20jeep%20build/IMAGE_026.jpg
http://i18.photobucket.com/albums/b105/worpedteg/My%20jeep%20build/IMAGE_025.jpg

Hey man is the Bronco's D44 a low pinion or a high pinion? I got a set from a '77 Highboy D44/D60 and the front is a Low pinion and I have been looking for some LP D44 builds to see how it worked out. Did you use stock style brackets or did you you do high steer and a OTK track bar?

[x2elite]

Bronco 44's are high pinion.

[W.O.R.P.Offroad]

like x2elite said bronco are high pinion. as far as steering is setup i havent dont it yet. its just kinda sittin under there right now. im goin to be buildin a crossover steering and custom track bar. im also stayin with the radius arms and doing them like a long arm setup with out upper arms. i will also be building me a new front bumper. that one was built to be a make do bumper that ended up stayin to long.

[cantab27]

looking good mate

[W.O.R.P.Offroad]

if everything goes as planned i may get her 29spline 8.25 this sunday and if so will be swapin it in and the non disco 30 the following weekend. both have 4.10 gears.

[alwaysxj]

sweet.. she is going to have a nice rig when you are done.


well you will never be done, but done enough tell you do something else...

[W.O.R.P.Offroad]

http://i18.photobucket.com/albums/b105/worpedteg/Mobile%20Uploads/IMAG0048.jpg

here is a pic of what mine looks like. got it back together. I got the 44/9" installed. put a set of 38.5 tsl/sx on it. took it out trail it did really well. once I get it to take park ill get some action pics.

haven't done much to hers.