PDA

View Full Version : 00 XJ blower motor



JeepPete
12-20-2016, 09:16 AM
Hey y'all I have a noisy blower motor and was wondering if I have to have the ac discharged to replace it? Any ideas? Thanks

Pinkyman
12-20-2016, 10:15 AM
The legend has it that you can disconnect it and wiggle it out with some finesse without disconnecting the AC lines and everything. I replaced mine when i had my dash out for the heater core and evap core replacement. It was super easy to do with the whole heater box on the ground in the garage.

If you need to replace your AC evap core, nows the time though. In my opinion, id say get it all done at once.

4.3LXJ
12-20-2016, 10:18 AM
You should be able to get it done without doing all that

JeepPete
12-22-2016, 08:56 PM
Thanks for the replies I did get it out and a new one in fairly easily. But the motor still sounds like it is rubbing against something when it turns. I do have all speeds now

Pinkyman
12-22-2016, 11:04 PM
If I recall correctly, I had to put a small washer on each bolt that holds it in, because the aftermarket blower cage was rubbing on the heater box...