PDA

View Full Version : looking for...



jeepmedic
11-17-2009, 04:45 AM
hey does any body know if there is some one or a brand that makes a HEI or coil on distributor ignition for an 89 i6, i haver searched and searched, also looking for a new wiring harness for the same 89 I6 and no painless dosnt have one they only have for 91-96? i am trying to simplifiy the wiring under the hood because what i have is a complete mess i have more plugs the plug ins and more wires going no where that i cant explain. this sounds sad but i have more sense on the vaccume (which there is a million of) then i do the stupid electical. so if anybody can help me out tht would be great.

xj4life2
11-17-2009, 10:40 AM
I would try Hesco for ignition enhancement and Centech for the wireing. If you call Painless they may be able to put together a kit for you, as for a coil on dist. I have never seen one I have used a GM single wire set up on the 4.2's never tried it on the 4.0. Assuming that you have the Renix system I'm not sure If anything other than upgrades will work due to the way they interperate signals from the different sensors. Check with our resident Renix guru he may be able to give you additional direction on this one.

pvt.Tadpol xj
11-29-2009, 11:22 AM
It wouldnt hurt to just browse at the ACCEL web site.:coffee:

BlueXJ
11-29-2009, 02:06 PM
http://www.jegs.com/webapp/wcs/stores/servlet/KeywordSearchCmd?Ne=1147708&langId=-1&storeId=10001&N=1545645%2b4294959599&catalogId=10002