PDA

View Full Version : Napier V2 Bumper Caps



msmoorenburg
03-24-2015, 06:48 AM
For the Jeepers that prefer the clean factory look these are for you. The bumper caps can be installed in under a hour. Here is my transformation

Before (my issue with stock is when flexed you can push the end caps off)

http://i1135.photobucket.com/albums/m639/sellitx/97%20Jeep/20150323_165700_zpsdycjfyxx.jpg (http://s1135.photobucket.com/user/sellitx/media/97%20Jeep/20150323_165700_zpsdycjfyxx.jpg.html)
http://i1135.photobucket.com/albums/m639/sellitx/97%20Jeep/20150323_165652_zpsqlbhta3g.jpg (http://s1135.photobucket.com/user/sellitx/media/97%20Jeep/20150323_165652_zpsqlbhta3g.jpg.html)

Caps removed (2 bolts)

http://i1135.photobucket.com/albums/m639/sellitx/97%20Jeep/20150323_170228_zpsglqz6d5e.jpg (http://s1135.photobucket.com/user/sellitx/media/97%20Jeep/20150323_170228_zpsglqz6d5e.jpg.html)

You drill out the 3 pop rivets holding the old bracket on

http://i1135.photobucket.com/albums/m639/sellitx/97%20Jeep/20150323_172506_zpsf9p1lbvw.jpg (http://s1135.photobucket.com/user/sellitx/media/97%20Jeep/20150323_172506_zpsf9p1lbvw.jpg.html)

Napier Precision offers 3 types of hardware to suite your style

http://i1135.photobucket.com/albums/m639/sellitx/97%20Jeep/20150323_172522_zps65bh7kek.jpg (http://s1135.photobucket.com/user/sellitx/media/97%20Jeep/20150323_172522_zps65bh7kek.jpg.html)

After 4 holes per side you have the finished product.

http://i1135.photobucket.com/albums/m639/sellitx/97%20Jeep/20150323_173549_zpssyuahimq.jpg (http://s1135.photobucket.com/user/sellitx/media/97%20Jeep/20150323_173549_zpssyuahimq.jpg.html)

http://i1135.photobucket.com/albums/m639/sellitx/97%20Jeep/20150323_182226_zps92pzdjcv.jpg (http://s1135.photobucket.com/user/sellitx/media/97%20Jeep/20150323_182226_zps92pzdjcv.jpg.html)

http://i1135.photobucket.com/albums/m639/sellitx/97%20Jeep/20150323_190700_zpst34c2ush.jpg (http://s1135.photobucket.com/user/sellitx/media/97%20Jeep/20150323_190700_zpst34c2ush.jpg.html)