HELP!!!! Heater core swap 52% done help!!!

[thesupercroc]

Greeting XJ talk !

I'm about 52% done with changing my heater core but right now I'm stuck at getting the A/C lines disconnects off any one have some tips or tricks to get them off? :bang::bang:

As soon as I find my SD card reader i will get picks up in my build thread.:bacondance:

[bluedragon436]

I am sure Matt (Msmoorenburg) will be on here shortly and I know he knows how to swap out the heater core if someone else doesn't answer before hand... you might try shooting hime a PM if you are kind of rushed on time and not be able to wait for replies... I would think that they would be similar to other "pressurized" lines and you have to use on of those little AC/fuel line/transmission line removal tools

http://www.harborfreight.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/i/m/image_12488.jpg?01AD=3cyUYegtP1yBlcL2yvUqFZnidzOzJ HeSF9gVxhsBt0oD7BEUbfEi_Fg&01RI=7B8B69501CCF403&01NA=na
(http://www.harborfreight.com/6-piece-fuel-line-and-a-c-quick-disconnect-tool-97576.html#.UxVvFdy4mlI)

or spend a couple bucks more

http://www.harborfreight.com/media/catalog/product/cache/1/image/9df78eab33525d08d6e5fb8d27136e95/i/m/image_12802.jpg?01AD=3itNDcg1qpnfUg-NEHwLn1YwodstMp2Rxx5y0lxucza0gnTIvizGgEA&01RI=111AD21BB9BD46B&01NA= (http://www.harborfreight.com/4-piece-a-c-fuel-line-disconnect-set-98118.html#.UxVvVty4mlI)

[msmoorenburg]

Blue is on the right track the first tool is required and the joint is just after the filter dryer. They normally have clips over the joints