PDA

View Full Version : My weekend project (non jeep related)



bigjim350
02-24-2014, 10:42 PM
So last weekend I traded Matt a car for a boat trailer. Some of you may say "A car for a boat trailer?!?! Matt ripped you off" Well yall didnt see the car. Was a pretty even trade. Trailer was in pretty good shape. So I decided to build me a utility type trailer. Since my welding machine is not working, nor do i like welding on galvanized steel, I decided to build it without any welding. Here is a pic after i stripped all the boat brackets off of it....and the boat too.
http://i20.photobucket.com/albums/b249/bigjim350/20140223_113221_zpsbc20721d.jpg
You may notice that the crossmembers are v'd down in the center. So I bolted a 4x4 down to them, then screwed down a 1x4 on top of that to bring it up even with the frame rails.
http://i20.photobucket.com/albums/b249/bigjim350/20140223_125107_zpsdf01764c.jpg
I then screwed 2x6 wood crossmembers every 18". On the frame rails I used #12 TEK screws and fastened them to the center post using deck screws. I then screwed 2x10's to those crossmembers to make my deck.
http://i20.photobucket.com/albums/b249/bigjim350/20140224_142224_zpse6cef9da.jpg
Being a boat trailer, the tongue was way too long.
http://i20.photobucket.com/albums/b249/bigjim350/20140224_142249_zps2c8a5b39.jpg
I cut about 2' off of the tongue, then bolted on a new hitch. Also relocated the trailer jack that came on it.
http://i20.photobucket.com/albums/b249/bigjim350/20140224_152946_zps3e595a6c.jpg
I also put on new lights and new wiring. Thats all I have done for now. Stay tuned for updates. Plans are to build some ramps for it, put on some tiedown points and maybe build some sides. So far I have about $150 in it. Not bad for a decent 6'x12' trailer.

Brasscatz
02-24-2014, 11:01 PM
And here I was confused as hell as to what you were going to do with a boat trailer! Nice work bro!

Sent from my Samsung Galaxy S4 because my microwave couldn't do it

bluedragon436
02-24-2014, 11:07 PM
Looks like a pretty decent trailer build... especially for no welding and making due with what you got..

4.3LXJ
02-24-2014, 11:13 PM
Nice deck Jim

cantab27
02-24-2014, 11:57 PM
whats it for ,,,,,,,,,,libby , midget marches ,Honda , unicycle .

bigjim350
02-25-2014, 12:30 AM
whats it for ,,,,,,,,,,libby , midget marches ,Honda , unicycle .

ATV's.

Sent from my SPH-L300 using Tapatalk 2

XJ Wheeler
02-25-2014, 12:49 AM
Nice little project! Turned out pretty well, a lot better than i would have thought a boat trailer would look turned into a utility type trailer. Good work!

Sent via messenger pigeon - i talk, he types.

cantab27
02-25-2014, 12:57 AM
ATV's.

Sent from my SPH-L300 using Tapatalk 2

ahh those thing people who cant ride two wheelers ride ........:smiley-taunt002:

looks the goods mate

msmoorenburg
02-25-2014, 09:13 AM
The way I see it I didn't have to launch the boat at the landfill :D You did that for me, and its one less thing have to look at:). Looks like it's coming along just fine :) and NO i'm not going to go buy a 4 wheeler:bacondance: