Blinkers not working.

[Kellson]

Hey so my blinkers are not working, the green lights on the dash don't come on either. The hazards work fine. Already went to the store and got the appropriate flasher but still no luck. Any ideas? Thanks

[4.3LXJ]

Check fuses yet?

Sent from my DROIDX using Tapatalk 2

[prcjeep]

Add fluid :)

[Kellson]

Which would those be? It's not just the flasher?

[drakan1908]

Only place that still carries it. http://kalecoauto.com/index.php?main_page=product_info&products_id=22

Sent from my XT907 using Tapatalk

[JeepFreak]

You need Fuse #4 (20 Amp) in your fuse block and Fuse #19 (15 Amps) in your fuse block if the fuse block looks like this:

[Kellson]

Thanks that's perfect! Hey while I'm down there, is there a fuse I can pull for the horn? There's a break in the positive wire somewhere and it keeps going off randomly.

[JeepFreak]

Thanks that's perfect! Hey while I'm down there, is there a fuse I can pull for the horn? There's a break in the positive wire somewhere and it keeps going off randomly.

While normally pulling out a fuse just to turn something off is not necessarily the best idea (you can also remove the horn by pulling off the 'Jeep' decal on the steering wheel and remove the metal connection that connects the 'pressure' to close the circuit), in your case whatever is easiest is your preference. Unfortunately for you, the horn fuse could potentially control your headlight delay as well but if you still want to remove it, it is Fuse #14 (25 Amps). Also a word of caution, when removing Fuse #4 (20 Amps) it potentially controls your rear window defogger, and your back up lights. Make sure they work or else you could get a ticket for not having Reverse lights.

[Kellson]

I already tried taking off the horn button and wrapping the ends of the pos/neg wire with electrical tape but the break is further down the wire. And the rear defrost doesn't work so maybe the fuse will fix the blinkers and that too!

[drakan1908]

Easiest way to disconnect the horn is unhook the wire from it or find the relay and pull it.

Sent from my XT907 using Tapatalk

[4.3LXJ]

Easiest way to disconnect the horn is unhook the wire from it or find the relay and pull it.

Sent from my XT907 using Tapatalk



Sent from my DROIDX using Tapatalk 2

[4.3LXJ]

Easiest way to disconnect the horn is unhook the wire from it or find the relay and pull it.

Sent from my XT907 using Tapatalk

Agreed

Sent from my DROIDX using Tapatalk 2

[JeepFreak]

I already tried taking off the horn button and wrapping the ends of the pos/neg wire with electrical tape but the break is further down the wire. And the rear defrost doesn't work so maybe the fuse will fix the blinkers and that too!

Worth a shot. Let us all know how it turns out.

[Kellson]

Ahh, so the slot for fuse 19 is totally messed up. That probably explains the problem. Is it possible to just replace the "slot" for fuses?

[JeepFreak]

Ahh, so the slot for fuse 19 is totally messed up. That probably explains the problem. Is it possible to just replace the "slot" for fuses?

Useless without pics :D

Get some pics up so we can understand what you need 'replaced'.