Electric Fan Conversion Kit!

[DirtBound Offroad]

Tired of the stock mechanical fan or worried about losing your radiator from the fan digging into it. Our electric fan conversion replaces the stock mechanical and electrical fan with three dual ball bearing 10″ electric fans, with an average combined CFM of 4,336 CFM.

We tested our fans and this is real world CFM numbers:

Average: 4,336.23
Min: 4,077
Max: 4,650

CNC Plasma Cut & Precision Bent Aluminum Shroud.

Fully Compatible with Stock, 2 row and 3 row OEM and aftermarket radiators. We have tested in house with OEM, Aftermarket OEM, Champion, and CSF with no fitment issues.


With the standard fan controller the fans are set to come on in two stages, the first fan will turn on at 185* and then the other two fans will turn on at 205*. This is a non programmable thermostatic switch made in Germany for the highest of quality

Kit comes in two versions:

Pre Wired: Kit comes wire harness already completed ready to use, just mount the fans on the shroud connect the push connectors to the fan, install the sensor probe and connect it to the battery.

Wire Yourself Kit: Kit comes with all wiring and connectors needed to install, this is great if you like customizing your wiring setup.


Fans are shown red in photos for illustration purpose.

http://www.dirtboundoffroad.com/featured/xj-–-electric-fan-conversion-kit/

http://www.dirtboundoffroad.com/images/products/fankit/1-1.jpg
http://www.dirtboundoffroad.com/images/products/fankit/2-1.jpg
http://www.dirtboundoffroad.com/images/products/fankit/3-1.jpg
http://www.dirtboundoffroad.com/images/products/fankit/4.jpg
http://www.dirtboundoffroad.com/images/products/fankit/10.jpg
http://www.dirtboundoffroad.com/images/products/fankit/3.jpg
(http://www.dirtboundoffroad.com/featured/xj-–-electric-fan-conversion-kit/)

[DirtBound Offroad]

After struggling the last few months to keep the fan kits in stock I made the decision to stock up on components and we now currently have over 50 kits in stock for quicker shipping!
No more waiting 1-2 weeks for your order to ship.

Order your fan kit today!

[TheWeiss]

I'm worried about the clearance between your fans and the bolts that stick out of the place where the existing belt driven fan attaches. Once the belt driven fan is taken off the treaded bolts remain. Can they be removed without causing issues to the still rotating belt driven fan mounting point?

[XJ4IV]

I had the same issue.... just put the nuts back on there to put the pully back on and cut the excess off, they will clear just fine!

[DirtBound Offroad]

We include bolts that replace the studs, you just pull the old fan studs out and put the new bolts on.

The fan kit is on sale until wednesday for 20% off.

[DirtBound Offroad]

These kits are now available again!

[DirtBound Offroad]

Thanks for the orders

[DirtBound Offroad]

Summers comin... Keep it cool with your new fan kit! Order today!

[DirtBound Offroad]

Thank You for the orders!