98 Jeep partout

[msmoorenburg]

Post or Pm me what you need from this rig. The PO only wheeled it for 3 hrs and now its a no start and he gave up!

The rims and tires are on hold to a local guy

http://i7.photobucket.com/albums/y299/msmoorenburg/eep5.jpg

http://i7.photobucket.com/albums/y299/msmoorenburg/eep1.jpg

[bluedragon436]

Not too much 98 XJ left to that bad boy!! LOL.. Is it just a CPS that is the issue or what??

[bigjim350]

What kind of control arm setup is that? Didnt have a chance to look to close last time...it was raining.

[Mudderoy]

What kind of control arm setup is that? Didnt have a chance to look to close last time...it was raining.

3 link long arm on the Dana 30

[lonewolf411]

how high are the leaf springs?

[msmoorenburg]

not 100% sure but its a aal with 3 in blocks

[tobyw]

Has it got a factory fog light switch/bezel?

Any chance the center console lid clip isn't broken?

[bluedragon436]

What shape is the mech. fan shroud in?? if it's even there at all... Also shipped to 21912 if it is in good shape, as mine is completely gone, thanks to the shop that did my water pump, serp belt..

[msmoorenburg]

Has it got a factory fog light switch/bezel?

Any chance the center console lid clip isn't broken?

Nope the other admin scooped it up

[msmoorenburg]

What shape is the mech. fan shroud in?? if it's even there at all... Also shipped to 21912 if it is in good shape, as mine is completely gone, thanks to the shop that did my water pump, serp belt..

Sorry its gone have a look on amazon, I found them for 6bucks and like 12 shipping. :sniper:

[msmoorenburg]

So parts sold/spoken for

1. radiator
2. tranny
3. engine (awaiting payment)
4. transfer case 242 (awaiting payment)
5. procomp shocks (awaiting payment)



No one wanting to do a 2gn console swap?

[xjrev10]

Brake booster/master to 55792?

[prcjeep]

trade ya my interior for that ones... Looks like its gray, am I correct?

[msmoorenburg]

trade ya my interior for that ones... Looks like its gray, am I correct?

it is grey come out and have a look

[ezbuzzsaw]

I am in Cypress and would like to know how much for the Arms and springs all the way around?

[OrangeXJ]

Post or Pm me what you need from this rig. The PO only wheeled it for 3 hrs and now its a no start and he gave up!

The rims and tires are on hold to a local guy

http://i7.photobucket.com/albums/y299/msmoorenburg/eep5.jpg

http://i7.photobucket.com/albums/y299/msmoorenburg/eep1.jpg

Why don't you keep it and wheel the shit out of it?

[weaselguys]

How about steering components , is there a drag link or stabilizer ?

[msmoorenburg]

How about steering components , is there a drag link or stabilizer ?


All sterring components are up for sale I'll get pics tonight

[weaselguys]

Any more info on what steering components are for sale & what kind they are ?

[Showtime3492]

I dont know what it is about that thing.. But id drive it!

[zoro288]

i was asking for the wiring in the engine side upto the dash board is it available?

[TomBorsari]

I am very interested in the track bar if it is by chance a double shear with the frameside mount.... also any steering upgrades and the coils if they are 6.5?
will pay paypal

[XJ4IV]

Matt if nobody bites on the arms and those shorter coils sitting on the ground... Id be interested... might eventually do to a coil rear!

[XJ4IV]

its hard to tell what kind of lift since its hacked up pretty hard, what size tires are those? Im not interested but the tires size will help me out as far as gauging the lift size

[msmoorenburg]

its hard to tell what kind of lift since its hacked up pretty hard, what size tires are those? Im not interested but the tires size will help me out as far as gauging the lift size

33's

[XJ4IV]

so thats about a 4.5 inch lift with cutting. sounds about right... just wish the AAL in the back netted more height, id be interested in a 3"AAL

[bigjim350]

Think its closer to 6". 3" coils with 3" spacers.

[XJ4IV]

yeah suppose your right... just sagged out springs

[tjbuggie]

how much for the front drive shaft?? what rear end is in it?? how much for the rear end??

[msmoorenburg]

how much for the front drive shaft?? what rear end is in it?? how much for the rear end??

the front shaft when is in my jeep now. It has a welded 8.25

[tjbuggie]

what gears in the rear?? how much you want for it

[86-cheif]

Track bar?

[msmoorenburg]

Track bar?

its a home made unit that is all jacked up